HUINUO CP5000-D inks Stirrer 50L/1.5KW
The capacity of the barrel is 50L, the input Voltage is 220V, 50HZ, the power of the whole machine is 1.5KW, the external size is 1150 × 700 × 480mm, the size of the barrel is 4A 400 × 410mm, the minimum volume of the barrel is 3KG, the maximum amount is 50KG, the speed is 0-50 rpm, and the net weight of the whole machine is 188KG.
HuiNuo
CP5000-D
CP3000-D
CP2000-D
-
HUXI JB50-SH Test Stirrer Square Anchor Impeller Slurry 70mm Length 350mm
$ 378.00 -
HUXI HJQ-2 Vertical Pneumatic Stirrer Three hole Impeller Slurry 100mm Rod length 400mm
$ 1284.00 -
HUXI RWD50 LCD Top Stirrer, Round Three Hole Fan Impeller Slurry 100mm Rod Length 300mm
$ 564.00 -
HUXI HJQ-2 Explosion Proof Pneumatic Stirrer Impeller Slurry 50mm Rod Length 500mm
$ 1278.00 -
HUXI RWD150 Paste Stirrer, Three Blades Impeller Paste 70mm Rod Length 350mm
$ 777.00
Introduction
In order to meet the market demand and meet the higher requirements put forward by customers, the new generation of CP3000-D mixer is designed and produced. The operation is simple and convenient; Low-speed, intermittent mixing with the barrel; The unique stirring paddle design allows the ink to be turned and sheared during the stirring process, and the ink can be thoroughly stirred within ten minutes. The ink does not heat up after stirring. Easy to replace the barrel, (stainless steel barrel); The stirring speed can be adjusted by frequency conversion.
Application
Ink factory, paint factory, chemical factory, printing factory, screen printing factory, circuit board factory, garment factory, etc.
HuiNuo CP5000-D StirrerSpecifications
| LIST | VALUE |
|---|---|
| Barrel Volume | 50L |
| Barrel size | Φ400×410mm |
| Barrel Volume | Minimum quantity 3KG, maximum quantity 50KG |
| Speed range | 0~50rpm |
| input Voltage | 220V,50HZ |
| Rated Power | 1.5KW |
| Dimension | 1150*700*480mm |
| Net Weight of the whole machine | 188KG |
HuiNuo CP5000-D Stirrer Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.