TRUIT TR 5130 Indentation Hardness Tester
Indentation weight 1000 +/- 5g, payload weight 500 +/- 5g, reading accuracy 0.1mm, Light source incident angle greater than 60 °.
TRUIT
TR 5130
-
JFL QHY Buchholz indentation
$ 347.00 -
PUSHEN QHY Buchholz indentation Tester
$ 335.00 -
TRUIT TR 5130 Indentation Hardness Tester
$ 288.00 -
TQC SP1900 Brinell indentation hardness meter, in line with ISO2815 standard
$ 1773.00 -
JINGKELIAN QHY Buchholz indentation Tester for the determination of the technical characteristics of the film Hardness test
$ 313.00
The indentation Hardness Tester is designed according to GB/T 9275, ISO 2815, BS 39100 E9, DIN 53153, ECCA-T12 standards, the indentation Hardness Tester can be used to evaluate the compression resistance of plastic coatings, during the test, a square test block with a load of 500 g equipped with a standard pressure knife is placed on the surface of the tested product, and the position is left after a period of time, and then the pressure knife is measured by a microscope with 20 times magnification.
Features
Two hard stainless steel fulcrums
Tungsten carbide round tools
Built-in horizontal bubbles ensure precision
High-precision microscopes guarantee correct results
TRUIT TR 5130 Indentation Hardness TesterSpecifications
| LIST | VALUE |
|---|---|
| Indentation Weight | 1000±5g |
| payload heavy | 500±5g |
| Reading Accuracy | 0.1mm |
| Light source | Incident angle greater than 60 ° |
TRUIT TR 5130 Indentation Hardness Tester Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.