TASI TASI-680 Wood Moisture Analyzer Moisture content measurement of wood

Introduction

TASI-680 for measuring the moisture content of woodWood moisture analyzerIn the range of 8%~28%, the wood moisture analyzer is a handheld, easy-to-use, 31/2 digit (1999 maximum reading), and a solid digital Moisture Meter, specially designed to be operated with one hand.

Open the protective cover above the TASI-680 wood moisture analyzer to reveal two probes that measure the moisture content of the wood. Press the MEAS button and insert the probe parallel into the grain of the wood to read the value.

The two probes are separated, the bottoms are not connected, and the height of the probes is suitable for any depth you want to test.

Actual picture of the product

Features

1. CE certification qualified. 

2. Measurement range: 8%~28%. 

3. Automatic shutdown. 

4. The principle of resistance measurement. 

5. Comes with a portable leather case.

6. Three different light colors show the moisture content of the wood:

    Green: dry condition in the air;

    Yellow: Slightly beyond normal condition;

    Red: Excessive moisture.

7. Sturdy shockproof shell.

Directions for use

1. Open the protective cover of the probe of the wood moisture analyzer and insert 2 probes into the wood smoothly

2. The wood moisture analyzer needs to be put into a depth of at least 0.4-0.5 cm, press the MEAS button, start the power, and the value can be read

3. When no button is pressed for more than 15 seconds, the Moisture Meter will automatically turn off. At this point, simply press the MEAS button again to restart the power supply

4. Continue to press the MEAS button to continuously do the measurement action

5. When the wood moisture analyzer reading is higher than 28%, the displayed value is not a true reading

6. When the battery is low, please replace the battery in time

host x1, manual x1, battery x1, leather case x1, certificate x1.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.