JINGKELIAN QNB No. 6 ISO Flow Cup outflow time 30s ≤ t ≤ 100s diameter 6mm

Viscosity range 134~ 685cSt, outflow time 30~100s, flow hole diameter 6mm, cup body material stainless steel, filter material stainless steel, Applicable standard ISO 2432-1993, GB/T6753.4-86

Brand

SKU: NB004767

JingKeLian

Model

QNB 6

Price

$ 138.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

JingKeLian shopSE

Information

Datasheet RFQ Contract Manual

What else did others buy

TRUIT TR 1008/5 ISO standard Viscosity Cup φ5.0mm

$ 125.00
Ander ZAHN Cup, Stainless Steel, Bore 1.93mm

$ 133.00
JINGKELIAN QND-4A Viscometer (Bakelite Cup) is suitable for measuring viscosity of Coating products under 150 seconds

$ 117.00
QNB ISO Flow Cup set YONGLIDA contains 3, 4 and 6 Flow Cups

$ 229.00
TRUIT TR 1010/2 Paint-4 cups, desktop four cups

$ 161.00

Genuinegoods

JingKeLian QNB 6 ISO Flow CupOverview
Specifications
Comments
FAQs

QNB 6

ISO Flow Cup

Viscosity range 134~ 685cSt, outflow time 30~100s, flow hole diameter 6mm, cup body material stainless steel, filter material stainless steel, Applicable standard ISO 2432-1993, GB/T6753.4-86

Introduction of ISO outFlow Cup

JinKeLian QNB ISO outFlow Cup has three types of outflow Viscosity Cups, QNB No. 3, No. 4 and No. 6. This ISO outFlow Cup is developed by integrating the relevant provisions of the national standard and the international standard. It adopts stainless steel material. QNB No. 3/No. 4/No. 6 ISO outFlow Cup is used to test the outflow time of Newtonian or near-Newtonian liquids, and the applicable test outflow time range is 30s~100s.

application standard

1. International standard ISO2432-1993 "Determination of outflow time with outFlow Cup for paints and varnishes" (fourth edition)

2. National standard GB/T6753.4-86 "Determination of coating flow time - ISO Flow Cup method"

Specifications

model	Outlet diameter (mm)	Viscosity range (mm²/s)
QNB No. 3	3.0± 0.01mm	7-40 mm²/s
QNB No. 4	4.0± 0.01mm	35-135 mm²/s
QNB No. 6	6.0± 0.01mm	134-685 mm²/s
Other parameters
Executive standard	GB/T6753.4-86, 1ISO243-1993
outflow time	30s≤t≤100s

Introduction

Details of JinKeLian QNB No. 6 ISO outFlow Cup 1

JingKeLian QNB 6 ISO Flow CupSpecifications

LIST	VALUE
Viscosity range	134~685cSt
outflow time	30~100s
Flow hole diameter	6mm
Cup body material	stainless steel
Filter material	stainless steel
Applicable standard	ISO 2432-1993、GB/T6753.4-86
Certificate	without

JingKeLian QNB 6 ISO Flow Cup Packing list

Flow cup x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Is the flow cup of this number suitable for the viscosity test of vehicle topcoat Coatings?

[A]

suitable

[Q]

Do you have the ISO flow cup involved in ASTMD5125?

[A]

The QNB No. 6 ISO flow cup will do.

[Q]

Coating viscosity measured by flow cup method, must be at the specified temperature? If not according to the specified viscosity will have any impact?

[A]

Viscosity cup measurement generally has 3 variables, viscosity, outflow time and temperature. Temperature is specified in many viscosity measurement standards because temperature has a large impact on viscosity, and the change of viscosity with temperature may not be dominant, and any diluted material used to adjust viscosity may also change the rate of this change.

[Q]

Does ISO 6MM refer to the No. 6 cup?

[A]

The No. 6 cup is evolved from the coated-4 cup (4mm), which is actually not rigorous. Different standards such as ISO, GB, ASTM, etc. have the same or similar diameter viscosity cup, depending on the standard you want to meet.

+JingKeLian QNB 6 ISO Flow Cup Big data

+JingKeLian QNB 6 ISO Flow CupSimilar products

+JingKeLian QNB 6 ISO Flow CupStandard

+Navigation