AMITTARI LTMS-200 Wire Tensimeter high-precision fiber Tension Tester
High-precision and versatility, three-wheel Tension Measurement principle, high-resolution digital display provides detailed measurement data in real time, supports conversion of four Measurement units and USB, Bluetooth data output.
AMITTARI
LTMS-200
-
AMITTARI LTMS-2K wire Tension Tester, wire Tension Tester
$ 434.00 -
LANDTEK LTTS-200 Digital Wire Tensiometer 1.96N
$ 430.00 -
Digital Tensiometer HZS-10 Hypertherm 10N/1kg/2.2lb
$ 223.00 -
AMITTARI LTMS-20K Line Tensimeter, Three-wheel Tension Measurement principle
$ 434.00 -
AMITTARI LTMS-10K Wire Tensifier, Yarns, Fibers, Wires and Fibers
$ 434.00
The LTMS Digital Tensiometer is a handheld device used to accurately measure the tension of various process materials (including yarns, fibers, wires, and optical fibers) in operation or at rest.
Features
It uses the "three-wheel tension measurement principle".
High precision and high resolution. Digital display, no parallax.
N (Newton), kg (kg), lb (pound), g (gram) four units of measurement are available and converted to each other.
The current, maximum, peak, and minimum values that occur during the measurement interval are also displayed.
It can be set to automatically shut down for 10 minutes without operation; It is also possible to shut down by hand.
62 measurements are taken per second and the average of the measurements is displayed according to the user-selected time intervals.
It uses USB data cable output to communicate with PC.
Bluetooth and Bluetooth data output options are available
AMITTARI LTMS-200 Wire tensioMeterSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0~0.2kgf 0~200gf 0~1.96N 0~0.44Lbf |
| resolution | 0.001kgf 1gf 0.001N 0.001Lbf |
| Precision | +/- 1.0% or better |
| Wheel spacing | 40mm |
| unit | kgf, gf, N, Lbf |
| Measurement principle | strain gauge |
| Measurement frequency | 16 milliseconds (62.5 sampling/s) |
| Sensing Wheel Offset (MAX Maximum) | 0.2mm |
| overload Capacity | 150% of full scale |
| temperature coefficient | Zero point: less than +/- 0.3% FS/℃ Within range: less than +/- 0.01% FS/℃ |
| display update rate | 0.5, 1.0, 2.0 or 4.0 second display conversion optional |
| Measured value | Current Value, MAX Maximum, Peak, MIN Minimum |
| Roller material | Stainless steel (standard) |
| Maximum speed | 2000m/min |
| operating conditions | Temperature: 0 ℃~ 40 ℃ (32 ° F~ 104 ° F) |
| Power Supply | 4X1.5v AAA AA batteries |
| size | Host: 140mm * 70mm * 31mm |
| Weight | 400G (without battery) |
AMITTARI LTMS-200 Wire tensioMeter Packing list
host X1, portable case X1, certificate X1, manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.