AMITTARI LTMS-10K Wire Tensifier, Yarns, Fibers, Wires and Fibers
High-precision 3-wheel Measurement principle and advanced digital display technology, support multiple Unit switches and detailed real-time data display, equipped with USB and Bluetooth Interface.
AMITTARI
LTMS-10K
-
AMITTARI LTMS-20K Line Tensimeter, Three-wheel Tension Measurement principle
$ 434.00 -
DUBAN DB25-204SPT 20KN Ponzi Tensiometer, Range +/- 16900N
$ 560.00 -
Digital Tensiometer HZS-2 Hypertherm 2N/0.2kg/0.44lb
$ 223.00 -
AMITTARI SPT-104-5T side tensIon Meter, side tensIon Meter 49000N
$ 469.00 -
AMITTARI LTMS-5K thread tensIon Meter, three-wheel tension yarn tension Measurement Instrument
$ 434.00
The LTMS Digital Tensiometer is a handheld device used to accurately measure the tension of various process materials (including yarns, fibers, wires, and optical fibers) in operation or at rest.
Features
It uses the "three-wheel tension measurement principle".
High precision and high resolution. Digital display, no parallax.
N (Newton), kg (kg), lb (pound), g (gram) four units of measurement are available and converted to each other.
The current, maximum, peak, and minimum values that occur during the measurement interval are also displayed.
It can be set to automatically shut down for 10 minutes without operation; It is also possible to shut down by hand.
62 measurements are taken per second and the average of the measurements is displayed according to the user-selected time intervals.
It uses USB data cable output to communicate with PC.
Bluetooth and Bluetooth data output options are available
AMITTARI LTMS-10K Wire tensioMeterSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0~10.0kgf 0~98N 0~22Lbf |
| resolution | 0.01kgf 0.1N 0.1Lbf |
| Precision | +/- 1.5% or better |
| Wheel spacing | 105mm |
| unit | kgf, gf, N, Lbf |
| Measurement principle | strain gauge |
| Measurement frequency | 16 milliseconds (62.5 sampling/s) |
| Sensing Wheel Offset (MAX Maximum) | 0.2mm |
| overload Capacity | 150% of full scale |
| temperature coefficient | Zero point: less than +/- 0.3% FS/℃ Within range: less than +/- 0.01% FS/℃ |
| display update rate | 0.5, 1.0, 2.0 or 4.0 second display conversion optional |
| Measured value | Current Value, MAX Maximum, Peak, MIN Minimum |
| Roller material | Stainless steel (standard) |
| Maximum speed | 2000m/min |
| operating conditions | Temperature: 0 ℃~ 40 ℃ (32 ° F~ 104 ° F) |
| Power Supply | 4X1.5v AAA AA batteries |
| size | Host: 140mm * 70mm * 31mm |
| Weight | 400G (without battery) |
AMITTARI LTMS-10K Wire tensioMeter Packing list
host X1, portable case X1, certificate X1, manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.