AMITTARI LTMS-50K wire tensIon Meter, yarn, fiber, wire and fiber tension measurement
Excellent accuracy and versatility, Measurement range up to 50.0 kgf and High Precision of +/- 1.5%, Three-Wheel Tension Measurement principle, Flexible choice of four Measurement Units and real-time data.
AMITTARI
LTMS-50K
-
LANDTEK LTTS-5K Digital Wire Tensiometer 49N
$ 430.00 -
LANDTEK LTTS-2K Digital Wire Tensimeter 19.6N
$ 430.00 -
Digital Tensiometer HZS-5 Hypertherm 5N/0.5kg/1.1lb
$ 223.00 -
AMITTARI SPT-104-10T side Tension Tester, side Tension Tester 98000N
$ 610.00 -
AMITTARI LTMS-2K wire Tension Tester, wire Tension Tester
$ 434.00
The LTMS Digital Tensiometer is a handheld device used to accurately measure the tension of various process materials (including yarns, fibers, wires, and optical fibers) in operation or at rest.
Features
It uses the "three-wheel tension measurement principle".
High precision and high resolution. Digital display, no parallax.
N (Newton), kg (kg), lb (pound), g (gram) four units of measurement are available and converted to each other.
The current, maximum, peak, and minimum values that occur during the measurement interval are also displayed.
It can be set to automatically shut down for 10 minutes without operation; It is also possible to shut down by hand.
62 measurements are taken per second and the average of the measurements is displayed according to the user-selected time intervals.
It uses USB data cable output to communicate with PC.
Bluetooth and Bluetooth data output options are available
AMITTARI LTMS-50K Wire tensioMeterSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0~50.0kgf 0~490N 0~110Lbf |
| resolution | 0.01kgf 0.1N 0.1Lbf |
| Precision | +/- 1.5% or better |
| Wheel spacing | 210mm |
| unit | kgf, gf, N, Lbf |
| Measurement principle | strain gauge |
| Measurement frequency | 16 milliseconds (62.5 sampling/s) |
| Sensing Wheel Offset (MAX Maximum) | 0.2mm |
| overload Capacity | 150% of full scale |
| temperature coefficient | Zero point: less than +/- 0.3% FS/℃ Within range: less than +/- 0.01% FS/℃ |
| display update rate | 0.5, 1.0, 2.0 or 4.0 second display conversion optional |
| Measured value | Current Value, MAX Maximum, Peak, MIN Minimum |
| Roller material | Stainless steel (standard) |
| Maximum speed | 2000m/min |
| operating conditions | Temperature: 0 ℃~ 40 ℃ (32 ° F~ 104 ° F) |
| Power Supply | 4X1.5v AAA AA batteries |
| size | Host: 140mm * 70mm * 31mm |
| Weight | 400G (without battery) |
AMITTARI LTMS-50K Wire tensioMeter Packing list
host X1, portable case X1, certificate X1, manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.