Leeb Hardness Tester accessories, micro printer, Leeb Hardness Tester accessories

product description

In addition to the impact device probe, the optional accessories of Deguang Electronic Leeb Hardness Tester also include printers, support rings, and connecting wires. Different optional accessories can be selected according to the actual measurement situation to facilitate the measurement of the hardness of metals and other materials.

Printer introduction

The Leeb Hardness Tester printer of Deguang Electronics can be connected to the Leeb Hardness Tester to print the measured data and save the test data better.

Pictures

serial number	model	Schematic diagram of support ring	Application
1	Z10-15		Measuring outer cylindrical surface R10‐R15
2	Z14.5‐30		Measuring outer cylindrical surface R14.5‐R30
3	Z25‐50		Measuring outer cylindrical surface R25‐R50
4	HZ11‐13		Measuring the inner cylindrical surface R11‐R13
5	HZ12.5-17		Measure the inner cylindrical surface SR12.5‐R17
6	HZ16.5‐30		Measure the inner cylindrical surface SR16.5‐SR30
7	K10‐15		Side Outer Spherical SR10‐SR15
8	K14.5‐30		Side Outer Spherical SR14.5‐SR30
9	HK11‐13		Side outer spherical surface SR11‐R13
10	HK12.5-17		Side inner spherical surface SR12.5‐SR17
11	HZ16.5‐30		Side inner spherical surface SR16.5‐SR30
12	UN		Outer spherical cylinder SR10‐∞

Host x1, manual x1, certificate x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.