HUITAO HT-1090 Ceramic Unglazed Brick Wear Resistance Tester, Unglazed Brick Wear Resistance Depth Tester
Cycloidal needle tooth meshing planetary transmission principle, in line with GB/T3810.6, GB/T12988, ISO10545-6 standards, suitable for unglazed bricks, cement pavement bricks and other brittle materials wear test.
huitao
HT-1090
-
HUITAO CSI-109 Multifunctional Scratch Tester, Five Finger Scratch Tester
$ 7875.00 -
HUITAO CSI-457 steel wool friction testing machine, non-conductive film wear test
$ 1268.00 -
Patek Jushi LY-TB3043 TABER Multifunctional Wear resistance Tester
$ 895.00 -
HUITAO CSI-252 DIN Wear resistance Tester Abrasion Tester
$ 1268.00 -
HUITAO CSI-339 Wear resistance Tester for alcohol abrasion
$ 879.00
Introduction
The ceramic unglazed brick wear-resistant Tester adopts the deceleration mechanism of cycloidal needle teeth meshing planetary transmission principle, which has the characteristics of compact structure, stable transmission, low noise and constant output transmission speed. The test time can be preset, and has a digital display function, when the predetermined time is reached, the motor will automatically stop rotating.
The Tester, GB/T3810.6-2006 "Wear Resistance Test Method for Unglazed Bricks" and ISO10545-6-1995 "Test Method for Deep Abrasion Resistance of Unglazed Bricks", GB/T12988-2009 "Inorganic Ground Material Wear Resistance Test Method" for the requirements of the test instrument.
It is suitable for the wear resistance test of brittle materials such as unglazed bricks and cement pavement bricks. It is to improve the inspection conditions of building ceramics and accessories manufacturers, improve the testing level, and ensure the inspection of products.
Operating Principle
The instrument is composed of a power transmission part, a specimen fixture part, an abrasive storage and supply part and an electrical control part. The grinding wheel rotates at a constant speed, and the sample is in contact with the friction steel wheel by applying pressure weights to % pressure, and the abrasive enters the grinding area evenly according to the specified flow rate, and the grinding pit is generated on the surface of the sample under the action of the abrasive. The degree of wear of the specimen is expressed by measuring the pit chord length (to 0.5 mm) on the surface of the specimen and calculating the pit volume. Each specimen is evaluated by the average wear volume of the two parts.
huitao HT-1090 Ceramic unglazed brick wear resistance TesterSpecifications
| LIST | VALUE |
|---|---|
| Friction method | swirl/ spin |
| Frictional contact form | face |
| Meet the standard | GB/T3810.6、GB/T12988、ISO10545-6 |
| Control system | PLC |
| Operating interface | Color 7-inch touch screen, switch between Chinese and English |
| Rotation speed of grinding wheel | 75 +/- 4r/min constant |
| Standard grinding wheel diameter | 200 +/- 0.2mm, thickness 10 +/- 0.1mm, Hardness HB500 or more; (applicable to GB/T3810.7-2006) |
| Optional grinding wheel two diameter | 200 +/- 0.2mm, thickness 70 +/- 0.1mm, Hardness HB500 or more; (applicable to GB/T12988-2009) |
| Specimen size | 100mm×150 mm |
| Storage hopper Volume | Greater than 5L |
| Optional abrasive | Its particle size is F80 white molten aluminum oxide specified in ISO8486-1986 |
| test time | Can be preset, touch screen digital display |
| Equilibrate Weight | The customer needs to provide the sample Weight. |
| Dimension | 980*550*820mm |
| Electricity requirements | 220V,20A,50hz |
| Air source requirements | 0-0.4 mpa customer |
huitao HT-1090 Ceramic unglazed brick wear resistance Tester Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.