HUITAO HT- 2285-6 six-station Martindale Wear resistance instrument
6 stations, counting range 0-999999 times, transverse travel 60.5 +/- 0.5mm, longitudinal travel 24 +/- 0.5mm, in line with ISO, ASTM D, GB/T, EN ISO standards.
huitao
HT-2285-6
HT-2285-9
HT-2285-8
HT-2285-4
-
JINGKELIAN JM-VI abrasion instrument, wood wear performance test
$ 1563.00 -
HUITAO HT- 2285-6 six-station Martindale Wear resistance instrument
$ 2434.00 -
CHINA NBC-500g weight rubber alcohol Wear testing machine accessories 500g
$ 89.00 -
MODERNER JM-V abrasion instrument (film configuration) is suitable for wear performance testing of Coating, paper, plastic, Spinning & weaving products
Login -
HUITAO CSI-113 Five Finger Scratch Tester Automotive Interior/Exterior trim Wear Detection
$ 5512.00
Scope of application
It is suitable for performance testing of woven fabrics, knitted fabrics, non-woven fabrics, decorative materials, coated fabrics, etcand tests of apparent pilling performance.
Meets standards
1. Standards:
ISO 5470: Rubber or plastic-coated fabrics – Determination of abrasion resistance
ISO12945.2：Determination of fabric pilling by Martindale method
2. United States Society for Testing Materials：
ISO12947：Textiles Determination of the abrasion resistance of fabrics using the Martindale method
ASTM D4966：Fabric Abrasion Resistance Test Martindale Abrasion Resistance Tester, and other products impact resistance test
ASTM D4970：Textile Abrasion Resistance Test Martindale Method
3. Chinese National Standards:
GB/T 4802.2：Textiles Determination of the pilling properties of fabrics
GB/T21196 ：Textiles Determination of Abrasion Resistance of Martindale Fabrics (Martindale Abrasion TestTester, Measurement of Specimen Breakage, Measurement of Mass Loss, Evaluation of Appearance Change)
GB/T13775：Abrasion resistance test of cotton, linen and silk woven fabrics
4. EU Standards:
EN ISO 12947：Textiles Determination of abrasion resistance of Martindale fabrics
5. United Kingdom Standards Institution
BS ISO12947：Determination of wear resistance of fabrics by Martindale method for textiles, etc
Operating Principle
The fabric to be tested is mounted in the upper specimen grip and rubbed against the abrasive mounted on the grinding table. The friction trajectory isLi Sharu graphics. After the specified friction phase according to the test requirements, the fabric is removed and the abrasion resistance index is measuredCalculate or visually describe the raising and pilling grades of the specimen.
huitao HT-2285-6 Wearing resistance TestersSpecifications
| LIST | VALUE |
|---|---|
| Friction method | swirl/ spin |
| Frictional contact form | face |
| station number | 6 digits |
| Count range | 0-999999 times |
| Great travel | Horizontal 60.5 +/- 0.5mm, Vertical 24 +/- 0.5mm |
| Pressurized Mass | Gripper: 200 +/- 1g, Clothing sample Weight: 395 +/- 2g, Furniture decoration sample Weight: 594 +/- 2g, Stainless steel disc: 260 +/- 1g |
| Effective friction diameter of grinding block | A type 200g (1.96N) friction head (9KPa) 28.8-0; B type 155g (1.52N) friction head (12 KPa) 90-0.1 mm |
| Relative velocity of gripper and mill | 20-70R/min (adjustable) |
| Loading hammer Mass | 2385±10g |
huitao HT-2285-6 Wearing resistance Testers Packing list
host X1, 4 sets of sample clips, wool felt 140mm (quantity according to station configuration) X1, wool cloth 140mm (quantity according to station configuration) X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveISO 12947-3
- ActiveISO 12947-4
- ActiveISO 5470-2
- ActiveISO 12947-2
- ActiveISO 17076-2
- ActiveISO
- ActiveISO 12947-1
- ActiveASTM D4966
- ActiveISO 5470-1-2016