HuiNuo BZT non-stick tire time Tester road marking paints non-stick tire time Tester

Application

It is mainly used for the determination of the drying time of non-stick tires in GA/T298-2001 "Road Marking Coatings" in "room temperature marking coatings" and "heating marking coatings". 

Operating Principle:

1. The sample is coated on the glass sheet (200mm×150mm×5mm), coated with the short side of the glass sheet parallel to the center of the long side into an 80mm wide band, and the thickness of the wet paint film is 200um±20um;

2. After coating, immediately press the stopwatch, 10 minutes later, the handle of the measuring instrument will be the center of the short side of the Tester self-test board at a constant speed to the other end of the roll for 1s, immediately observe the tire of the Tester with the naked eye whether there is sticky paint, if there is sticky paint, immediately wipe the tire with acetone or methyl ethyl ketone moistened cotton cloth, and then repeat the test every 30s until the tire is not painted, stop the stopwatch timer, the time is the "non-stick time" of the sample.

host X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.