Coil coater Rjy-00/800 Spreader 800mm double roll extrusion
Dip coating, suitable for Spreader production and winding equipment for drum substrates, effective application width 800mm, double roll to roll structure
Factory
Rjy-00/800
-
Factory Direct Rgdc- 01.2/400 immersion coil coater application width 400mm
$ 23389.00 -
Non-woven coil coater Small coil film laminating machine, unwinding → scraping → drying → scraping → drying → film laminating → winding function
$ 21835.00 -
Taigang TG - 300-0.5 S laboratory roll-to-roll small coater desktop roll-to-roll coater
$ 11730.00 -
$ 10175.00 -
Automatic Film Applicator with unwinding + scraping + drying + deviation correction + film laminating + winding function
$ 20280.00
This machine is mainly suitable for the coating (immersion bath) production of reel substrates
Equipment technology
Unwinding→ dipping (built-in glue circulation system) → double roll extrusion → pull-out load platform (1 m)
The main part is configured
(1) Unwinding unit (1 group in total)
Structural features:
Type: single station
Effective unwinding width: 500mm
Effective unwinding diameter: ≤φ400mm
Unwinding shaft: 1 piece of 3" (Φ76mm) inflatable shaft (overhanging structure)
Unwinding tension control: automatic tension control, magnetic particle brake, tension controller
Specifications:
The main configuration of unwinding:
Magnetic Particle Brake:
Tension Controller:
Inflatable shaft: 3"/cantilever type (winding part)
(ii) Front traction unit
Structural features：
1. Double-roller to roll structure, rigid and flexible combination
2. Steel roller: Φ42x800mm, hard chrome plating on the surface, super-fine grinding;
3. Rubber roller: Φ60x800mm: Shore (A) 70~75°, silicone material, pneumatic solenoid valve control adjustment, pressureadjustable(No need to install rubber rollers)
Specifications
Main traction configuration:
Steel roller: Φ42x800mm
Motor: SEND/0.75KW (servo controlled)
Factory Rjy-00/800 Soaking coil coaterSpecifications
| LIST | VALUE |
|---|---|
| Spreader process | Unwinding → dip coating → double roll extrusion → pull out platform |
| main substrate | PET or other non-breakable materials |
| glue | Water-based paints, solar-based paints and Miscellaneous |
| Spreader thickness range | Adjustable according to the process (formed) |
| Coating Method | soak |
| Bath size | 1000Mm length * 800mm width * 300mm depth (built-in circulation system, can be exchanged with external solvents to filtrate) |
| Bath material | Resistant corrosion stainless steel (note, the solution cannot react chemically with the material) |
| Dip tank guide roller | 2 sticks |
| Effective application width | Max.800mm |
| substrate | Less than 800mm |
| Roll surface width | 800mm |
| Extrusion unit - extrusion method | Double roll extrusion |
| Extrusion Unit - Adjustable Range | 0.3-10mm |
| Extrusion Unit - Spreader Adjustment | Handwheel adjustment, dial indicator display |
| Mechanical speed | 1.2M/min (0.1~ 1m/min production speed, depending on the process) The speed can be adjusted slowly |
| unwinding diameter | ≤ φ 400mm (paper core 3 ") |
| winding diameter | ≤ φ 500mm (paper core 3 ") |
| Reel the edges neatly | ±3.0mm |
| Total Installed Power | About 3kW (subject to actual customization) |
| Machine size | (L x W x H) According to process changes and final design drawings |
| Teflon roller | 4 pieces (installed in front of the Spreader head) |
| Power supply Voltage | Three-phase five-wire 380V 50Hz |
| Unwinding Unit - Type | Single station |
| Effective unroll width | 800mm |
| Effective unwinding diameter | ≤Φ400mm |
| Unwinding Unit - Unwinding Scroll | 3 " (φ 76mm) 1 piece of inflatable shaft (suspended wall structure) |
| Unwinding Unit - Unwinding Tension Control | Automatic tension control, magnetic particle brake, tension Controller |
| Front Traction Unit - Steel Roller | Φ42x800mm |
| Front Traction Unit - Motor | SEND/0.75KW (servo control) |
| conclusion | 1 meter bearing platform |
| size | About L3000mm x W1000mm x H1500mm (Note: subject to actual customization) |
| Weight | About 1t (subject to actual customization) |
Factory Rjy-00/800 Soaking coil coater Packing list
machine x1, manual x1, certificate x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.