Density Tester JHY-300W Solid Density Meter Imported Sensors 300g 0.001g/cm3
Weighing range 0.005g-300g, weighing accuracy 0.005g, Measurement range 0.001-99.999g/cm3, density accuracy 0.001g/cm3, specific gravity range > 1, < 1 can be tested, solution compensation setting can be freely set.
Factory
JHY-300W
-
INESA WMD-430 automatic density meter U-tube vibration principle 2~ 3ml injection
$ 8901.00 -
YUEPING MD-200 Electron Density Balance Maximum weighing 200g, minimum reading 10mg
$ 246.00 -
HYLOLOGY HY-100 (B) Powder Vibration Density Meter, Powder Particle Pore
$ 1283.00 -
XIONGFA MDJ-600A Solid Density Meter measurement range 0.01g~ 600g
$ 318.00 -
XIONGFA XFCNMD-6002S Hot-selling Solid Density Meter 0.01~ 600g
$ 377.00
Introduction
MD-300W high-precision plastic particle electronic hydrometer density accuracy up to 1/1000, equipped with Free Flip cover-free integrated aluminum alloy measuring table, transparent sink, higher accuracy, easier operation, faster and more humanized. The high-precision plastic particle electron hydrometer is suitable for the determination of the density of all solid substances, and has the characteristics of multi-function, high precision, easy operation and excellent performance.
Scope of application
Density of any solid form---- rubber products, plastic products, metal products, plastic particles, films, floating bodies, powders, foams, viscous bodies, fasteners, pipes, plates, wood, sponges, glass, metals, cement, gemstones, graphite, coal and rock, ceramics... and other similar products; It covers all areas of solid substances that are absorbent and non-absorbent.
principle
According to ASTM D792, GB/T 1033, ISO-9000 standards. The Archimedes principle buoyancy method is used to accurately and directly read the measured values.
Features
The Free Flip operation method is simpler, faster, and more in line with the new material laboratory operation specifications
It is suitable for density detection of small products and high-density products
It has the actual water temperature setting, the measurement medium density setting, and the waterproof treatment medium density setting
It has the functions of air buoyancy compensation setting and density upper and lower limit setting
For the research and development of new materials, the percentage of the main material content of the mixture of the two substances can be displayed
It can automatically determine whether the sample is qualified or not, and give an alarm
Fully automatic zero point tracking, buzzer alarm, overload alarm function
Powder metallurgy, magnetic materials, ceramics, refractories, friction materials, precious metals、... and other similar porosity products can be measured
It is equipped with a special windproof and dustproof cover, which is easy to combine and sturdy
RS-232C communication interface is included, which is convenient to connect to the printer and print measurement data
Water is used as a medium, but other liquid media can also be used
The integrated large-capacity measuring accessories are adopted, and the sink is corrosion-resistant, drop-resistant and break-resistant
This product is guaranteed free of charge for three years from the date of sale
Factory JHY-300W Solid Density MeterSpecifications
| LIST | VALUE |
|---|---|
| Weighing range | 0.005g-300g |
| Weighing Accuracy | 0.005g |
| Measurement range | 0.001—99.999g/cm3 |
| Density Accuracy | 0.001g/cm3 |
| Specific gravity range | > 1, < 1 can be tested |
| Solution compensation setting | Freely configurable |
Factory JHY-300W Solid Density Meter Packing list
Host X1, measurement table X1, integrally formed sink X1, stainless steel forceps X1, corrected weight X1, floating body measurement accessories X1, stainless steel tennis ball X1, Electronic Density Meter X1, Power Supply X1, Glass Ware X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.