JINGKELIAN QHD-P pendulum damping Tester Persoz Pendulum Hardness Tester
Persoz swing rod mass 500 +/- 0.1g, swing rod period 1 +/- 0.001S, swing time on flat Glass ≥ 420S, start and finish swing angle 12 °/4 °
JingKeLian
QHD-P
-
TQC SP0501 Pendulum Hardness Tester pendulum damping Hardness Tester 110VAC/50/60Hz
$ 10343.00 -
TQC SP0510 Persoz for sp0500/sp0501 Pendulum Hardness Tester
$ 955.00 -
JINGKELIAN QBY-II Pendulum Pole Film Hardness Tester GB/T1730 (B Method) M-3 Double Pendulum
$ 434.00 -
QBY film pendulum Hardness Gauge YONGLIDA stopwatch count
$ 242.00 -
QHD Pendulum damping Tester YONGLIDA meets GB and ISO standards
$ 484.00
Overview of the QHD pendulum damping Tester
QHD pendulum damping Tester is designed by Jingke according to the standard ISO1522 and ZBN72020-86 for determining the hardness of the paint film of pigment paint, varnish and other related products, and is equipped with two different total mass pendulums of Koenig pendulum and platinum sarz pendulum, which are 200+0.2g and 500+0.1g respectively.The main structure of QHD pendulum damping Tester includes instrument base, pendulum, technical device and instrument cover.
The working principle of the pendulum damping Tester
The hardness of the paint film is based on the pendulum rod that touches the surface of the paint film when it swings at a certain periodThe damping time (s representation) of the swing attenuation on the paint film, if the softer the surface, the faster the swing decay, and vice versa. Note that there is no conversion relationship between the results of tests performed with Konig and Persoz pendulums with different structures, masses, dimensions and periods, because the interaction between the pendulum and the coating also depends on the complex elasticity and viscosity of the coating. Therefore, in the product standard, only one kind of pendulum is specified in the determination of the damping time of a certain paint film.
Structural diagram of QHD pendulum damping Tester
1. Host
2. Starting the handle
3. a ruler
4. Adjust the foot horizontally
5. Timer
6. Photoelectric signal line
7. Pendulum
8. an instrument cover
9. a supporting plate control handle
10. a shutter release line
11. a photocell rack
Installation diagram of the plexiglass cover
1. Upper cover
2. a front plate
3. a rear plate
4. a left panel
5. The upper plate on the right side
6. a lower plate on the right side
7. a side door
8. a back door
QHD pendulum damping Tester display diagram
JingKeLian QHD-P Pendulum damping TesterSpecifications
| LIST | VALUE |
|---|---|
| Swing bar type | Persoz pendulum |
| Persoz swing Mass | 500±0.1g |
| Persoz swing cycle | 1±0.001S |
| Persoz Glass Swing Time | ≥420S |
| Persoz Glass Swing Count | 420 times +/- 14 times |
| Persoz start and end swing angle | 12°/4° |
| application standard | ISO1522、ZBN72020-86 |
JingKeLian QHD-P Pendulum damping Tester Packing list
host x1, starting handle x1, ruler x1, horizontal adjustment foot x1, Timer x1, photoelectric signal line x1, p pendulum x1, instrument cover x1, pallet control handle x1, shutter line x1, photoelectric tube frame x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.