| Spreader process | Unwinding → Soaking → Double Sided Extrusion Spreader → Transverse Slitting |
| Coating method | Double top coating cloth |
| Thickness range | 0.001-3mm |
| Film Accuracy | ±5% |
| Graduation | 0.001mm |
| percentile | digital display |
| Coating speed | 0~20M/min adjustable |
| Effective application width | ≤350mm |
| Roll surface length | 350mm |
| Unwinding outer diameter | Max. Ф350mm |
| winding outer diameter | Max. Ф350mm |
| Outer diameter of winding air expansion shaft | 3-Inch expansion shaft, load-bearing 50KG |
| Winding outer diameter range | ≤350mm |
| Bath size | 500*400*500mm |
| gas source | 0.5~ 0.8MPa compressed air |
| tension control | Max.60N |
| Control mode | automatic |
| Correction Accuracy | ±1mm |
| Slitting blade | straight knife slitting |
| cutting direction | transverse slitting |
| slitting length | Cut the coil into sheets according to the preset length |
| Edge trimming | Cut off the irregular part of the edge of the roll |
| Applicable coil type | Plastic film, metal foil, paper, non-woven fabric, etc |
| Spreader type | Water-based paints, solar-based paints, UV coatings, etc |
| Environmental temperature | 10℃ ~ 40℃ |
| Environmental humidity | ≤70% RH |
| Host Power Supply | 380V/2KW |
| Dimension | 2280 * 680 * 1600mm (subject to actual customization) |
| Weight | 1 ton (subject to actual customization) |
Warranty days: 365 days