Factory Rxf-10/1600UV Automatic Film Applicator DATASHEET
| Brand | Factory | Model | Rxf-10/1600UV |
|---|---|---|---|
| From | China | Name | Automatic Film Applicator |
Specifications
| Spreader process | Unwinding → scraping → bonding → UV curing → disbonding → winding |
| Effective application width | φ 100~1600mm (adjustable) |
| Film Accuracy | ±10% |
| Coating speed | 50 to 80 m/min (minimum guaranteed 50 m/min) |
| Coating method | Slot-die Spreader |
| Spreader Range | 20～100 g/m² |
| Fitting method | Roll fit |
| Fitting speed | 1~10m/min |
| Fitting Accuracy | 0.5mm |
| Fitting pressure | 0.1~ 0.5 MPa (adjustable) |
| Fit width | φ 100~1600mm adjustable |
| Roll surface length | 1600mm |
| unwinding method | Release paper/film unwinding, double station automatic paper connection |
| substrate unwinding | Single station, equipped with automatic correction system |
| maximum discharge | Φ1600mm |
| unwinding diameter | Φ600mm |
| winding diameter | Φ600mm |
| winding method | Release paper/film winding, finished product winding, independent winding |
| UV Lamp Power | Spreader speed and material curing requirements |
| UV light source | LED |
| Outer diameter of winding air expansion shaft | 3-Inch expansion shaft, load-bearing 50KG |
| tension control | automatic control |
| Correction control | automatic control |
| Control system | PLC control, Touch screen Operating interface |
| thickness control | manual control |
| gas source | 0.5~ 0.8MPa compressed air |
| Emergency stop button | √ |
| Warning sign | √ |
| Applicable coil type | Plastic film, metal foil, paper, non-woven fabric, etc |
| Spreader type | Water-based paints, solar-based paints, UV coatings, etc |
| Environmental temperature | 10℃ ~ 40℃ |
| Environmental humidity | ≤70% RH |
| power requirements | 380V, 50Hz, three-phase five-wire system |
| Machine Weight | 2 tons (subject to actual customization) |
| Dimension | 13000mm*2000mm*1800mm (subject to actual customization) |
Packing list
Host x1, Manual x1, Encasement List x1, Certificate of Conformity x1
After-sales instructions
Warranty days: 365 days
1. For product quality problems caused by non-human products of instruments and equipment, the manufacturer will provide free warranty services during the warranty period;
2. There is no warranty period for fragile and consumable parts, and if you find product quality problems after receiving the goods, please apply for return and exchange within 7 days, and you will not wait for the overdue ones;
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/49123/Specification.html , which is only used by users who purchase commodities from the NBCHAO.
Created on : 2025/12/31