DONGRU DR82C Lens Transmittance Tester
Measurement range 0-100%, Measurement accuracy 0-95% +/- 2% (colorless uniform transparent or translucent objects), resolution 0.1%, Operating temperature 0 ℃ -50 ℃, Operating humidity 20% -90% RH.
DongRu-
Hypertherm TGL-18 Transmittance meter light transmitance analyzer
$ 366.00 -
DONGRU DR82B blue-violet light transmittance Tester
$ 347.00 -
AMITTARI AT-175P Portable Transmittance meter with Bluetooth printer
$ 467.00 -
LINSHANG LS108A lens transmittance Measurement Instrument, infrared inks hole Tester, three-in-one optical path
$ 360.00 -
LANDTEK WTM-1300 Transmittance meter (UV-IR-Visible)
$ 352.00
Introduction
DR82C lens transmittance Tester is a desktop small optical transmittance Tester, mainly used to measure the visible light and infrared transmittance of the IR ink hole of the mobile phone lens, it uses visible light 550nm light source, infrared 940nm light source, infrared 850nm light source to irradiate the measured transparent substance, the sensor detects the incident light intensity of the three light sources and the light intensity after passing through the measured transparent substance, the ratio of the transmitted light intensity to the incident light intensity is the transmittance, expressed as a percentage. The test aperture is 1mm, and the size of the measured object is greater than 1mm. The three-in-one optical path design can measure three data in one hole. Scope of application: It is dedicated to measuring the IR ink hole of mobile phone lenses, and can also measure the optical transmittance of infrared transmitting objects such as solar film, heat insulation film, sunglasses, infrared filters/filter strips, remote control windows and other materials.
Note: This instrument is not suitable for measuring the transmittance of printed and milky matte materials; The instrument should not be used in sunlight or bright light.
Features
The three-in-one optical path design can obtain the transmittance of three channels in one measurement, which is convenient to operate and time-saving
Collimated light design, stable and accurate measurement results for testing large thickness materials
The test aperture is 1mm, which can test the transmittance of small materials
It has the function of real-time automatic measurement, dynamic automatic calibration, and automatic calibration to 100% transmittance after power on
The instrument comes with a Type-C interface, which can be connected to the PC terminal to realize the function of transmitting data
There are two test methods: continuous (CONT INUE) and single (SINGLE) measurement methods
Beep indication during operation (single measurement method)
Large-capacity storage for 10 sets of 200 pieces of data for a total of 2,000
5-inch LCD color screen display
Bilingual versions in Chinese and English are available
It is powered by 5V power supply, which is convenient to connect to the mobile power bank (power bank).
DongRu DR82C Lens transmittance TesterSpecifications
| LIST | VALUE |
|---|---|
| test hole diameter | 1mm |
| test height | 25mm |
| Measurement range of transmittance | 0-100% |
| Light source | 550nm,940nm,850nm |
| Measurement Accuracy 0-95% | +/- 2% (colorless uniform transparent or translucent objects) |
| resolution | 0.1% |
| instrument Weight | About 1900 grams |
| Instrument Dimensions | Length 200mm × Width 200mm × Height 167mm |
| Power Supply | DC-5V |
| Display | 5 inch color screen |
| Operating temperature | 0℃-50℃ |
| Operating humidity | 20%-90%RH |
DongRu DR82C Lens transmittance Tester Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.


DR82C






