HUITAI VO-16092 (3.2CF) Vacuum Oven export type 150 ℃/90L

Introduction

It is widely used in biochemistry, chemical and pharmaceutical, medical and health, agricultural research, environmental protection and other research and application fields, for powder drying, baking and disinfection and sterilization of various glass containers. It is especially suitable for fast and efficient drying of dry heat-sensitive, easily decomposable, easily oxidized substances and complex composition items.

peculiarity

• Five-sided heating (16020/16050), heating elements are located at the top, bottom, left and right sides of the oven and the back, evenly distributing heat in a vacuum.

• Separator heating (16092/16213), the heating element is located at the bottom of the separator, which can dissipate heat evenly under vacuum.

• Temperature Fluctuation up to ±1°C.

• Double-walled tempered glass door for clear observation.

• PID temperature controller with timing, digital display of measured temperature and set temperature.

• The chamber is made of 304 stainless steel plate, and the shell is sprayed with high-quality cold-rolled steel plate.

• The oven is equipped with a KF25 air extraction port and an inert gas inlet valve with a diameter of 10 mm. If an inert environment is required for the experimental sample, it can be filled with nitrogen or other inert gases.

• Mechanical pressure gauges allow for more accurate vacuum readings.

• Built-in 4 bright LED strips, easy to observe the sample.

• Tested under vacuum for more than 24 hours.

• The vacuum oil gauge can effectively prevent vibration

• Form casters are easy to move and more durable

remark

The technical parameters were tested under the conditions of ambient temperature 20°C, 50%RH, no load, no strong magnetism, no vibration, etc.

host X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.