Factory Rgdc-00/400 Soaking coil coater DATASHEET
| Brand | Factory | Model | Rgdc-00/400 |
|---|---|---|---|
| From | China | Name | Soaking coil coater |
Specifications
| Spreader process | Unroll → Scratch → Soak → Roll |
| Coating method | scraping |
| Coating size | ≤400mm |
| Width of guide roller | 400mm |
| Thickness range | 0.001-3mm |
| Film Accuracy | ±5% |
| Graduation | 0.001mm |
| percentile | digital display |
| Spreader thickness control | manual |
| Coating speed | 0~20M/min adjustable |
| winding diameter | 3-Inch expansion shaft, load-bearing 50KG |
| tension control | Max.60N |
| unwinding diameter | Max. Ф400mm |
| winding diameter | Max. Ф400mm |
| Tension Control mode | automatic |
| Control mode | automatic |
| Correction Accuracy | ±1mm |
| Dip coating type | Solution soaking (Note: After the substrate is crystallized in solution, it can be rolled around the tape) |
| Dip coating material | Resistant corrosion stainless steel (note, the solution cannot react chemically with the material) |
| Number of baths | 1 |
| Applicable coil type | Plastic film, paper, non-woven fabric, etc |
| Spreader type | Water-based paints, solar-based paints, UV coatings, etc |
| Dimension | 4000Mm * 600mm * 1600mm (subject to actual customization) |
| Weight | 0.5T (subject to actual customization) |
| Power Supply | Single Phase AC220V +/- 10%, Frequency 50Hz, Power 9.5KW |
| gas source | 0.5~ 0.8MPa compressed air |
Packing list
Film Applicator x1, film device x1, unwinding device x1, deviation correction device x1, immersion tank x1
After-sales instructions
Warranty days: 365 days
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/49184/Specification.html , which is only used by users who purchase commodities from the NBCHAO.
Created on : 2025/12/17