Taigang TG-RR300 laboratory roll-to-roll small coater small hot-melt adhesive coater
Spreader type continuous Spreader, applicable system hot-melt adhesive, guide roller width 330mm, substrate width Max. 300mm, application width 0-280mm, can be adjusted by baffle, drawdown blade diameter < 60mm, back roller diameter < 80mm, roller beating < 5μm.
TaiGang
TG-RR300
-
Oven coil composite coater with unwinding + scraping + drying + covering + winding function
$ 26187.00 -
HuiNuo JTM - 0.5/300 UV small continuous coater with heating UV curing Maximum Spreader width 300mm
$ 9709.00 -
CHINA NBC-DJ5-1500 Automatic Film Applicator 2 meters oven
$ 38935.00 -
CHINA Laboratory Casting Machine LY-02/200 Thin Film Test Small Casting Machine
$ 23389.00 -
Automatic Film Applicator with rolling + scraping + drying + winding function application width 800mm
Login
Introduction
The continuous hot melt adhesive coating and laminating test machine is a laboratory mini hot melt adhesive coating and laminating machine that can be assembled with a high-precision modular coating station mechanism, and can be continuously coated and proofed or produced in small quantities. The hot-melt pressure sensitive adhesive can be applied directly to the heat-resistant substrate, or coated on the release paper and then the adhesive film can be transferred and laminated to different surface materials, such as paper, plastic model metal film, etc.
Configuration briefing
The whole machine is a high-precision modular coating station structure combined assembly.
The dial gauge is used as the indexing head to accurately fine-tune the coating gap between the upper and lower rubber wheels to control the coating thickness. The minimum gluing thickness is 0.01mm. When the thickness is set, the rubber wheel can be locked indirectly to prevent the gap from changing.
The maximum coating width is 300 mm (effective coating width 280 mm). The width is adjusted by two Teflon baffles in the tun. It can be coated and glued in unlimited lengths and automatically rewinded.
Forward and reverse stepless speed change, coating speed: 5m/min (speed 0.1-5M/MIN adjustable) The winding reel can be adjusted and the machine tension control receiving.
The warming rod, glue wheel and glue tank can be quickly disassembled and separated from the machine body to remove the residual glue.
Machine size: 1280*600*660(L*W*H)
Machine weight: about 150KG
Machine power supply: AC220V (single phase) / 50Hz machine power: 2kw
TaiGang TG-RR300 Laboratory roll-to-roll coaterSpecifications
| LIST | VALUE |
|---|---|
| Spreader type | Continuous Spreader |
| Applicable system | hot-melt adhesive |
| Width of guide roller | 330mm |
| substrate width | Max.300mm |
| application width | 0-280Mm, adjustable through baffle |
| Mechanical speed | 5m/min |
| Spreader thickness | Continuous Spreader minimum thickness on one side: 0.01mm (depending on the slurry, reference material requirements), thickness Accuracy ： ≤ +/- 5μm (excluding edge abnormal areas, see product evaluation for sampling measurement standards) |
| Drawdown blade diameter | Ф60mm |
| align both sides | +/- 0.5mm (length direction) |
| box Volume | About 0.5L |
| Back roller diameter | ≤ 80mm, roller runout ≤ 5μm |
| Heating mode | Heating rod |
| heating temperature | 0-200 degree adjustable |
| rewinding diameter | Max.Ф200mm |
| Rewinding and unwinding core | Ф76mm |
TaiGang TG-RR300 Laboratory roll-to-roll coater Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
