Gravity Dongke RT-S100L vibration testing machine, simulated automobile transportation testing machine, including computer
The maximum test load is 100kg, the frequency modulation range is 1.25Hz, the speed range is 100~ 300rpm, the maximum acceleration is 13m/s ², the displacement amplitude is 25.4mm, the vibration waveform is sine wave, the axial vibration is rotary vibration, the excitation mode is motor excitation, and the chill down mode is Air-Cooled.
ZhongLiDongKe
RT-S100L
-
Gravity Dongke RT-S90M-1000 vibration testing machine, mechanical vibration, including computer
$ 6860.00 -
Factory Direct NBC-5025 Vibration Tester 25.4mm amplitude 200kg Load
$ 893.00 -
Gravity Dongke RT-ES40L-550 Vibration Testing Machine (Open Loop Control) Electromagnetic Excitation, excluding computer
$ 6197.00 -
Tensile Tester NBC-50kN Microcomputer controlled electronic universal testing machine, maximum test force 50kN
$ 4650.00 -
Gravity Dongke RT-S100L vibration testing machine, simulated automobile transportation testing machine, including computer
$ 6544.00
Introduction
The simulated automobile transportation vibration test series is widely used in national defense, aerospace, communications, electronics, automobiles, household appliances and other industries. This type of equipment is used to find early faults, simulate actual Operating Conditions assessment and structural strength test, and the product has a wide range of applications, wide application area, remarkable test effect and reliability.
Features and Benefits:
Humanized operation and control, using professional measurement and control software control, so that the equipment works more stable and reliable
The whole machine is made of composite industrial materials, precision machining, and ultra-quiet
It has a safe and reliable protection function
The table body is cooled by a high-efficiency and low-noise fan to ensure long-term continuous operation
Using the principle of closed-loop control (negative feedback control), the sensor automatically controls the shaker after acquisition to ensure the output and test accuracy
It has constant vibration amplitude vibration and constant acceleration vibration
The system is equipped with vibration sensors to collect accelerometer, rotational speed and frequency values in real time
Humanized operation and control, using professional measurement and control software control, so that the equipment works more stable and reliable
Simulation tests of II., III., IV. road, sea and air transport in accordance with countries around the world
Pavement simulation mode to adapt to the testing requirements of different industries
The load capacity is large, the anti-eccentric load capacity is strong, and the amplitude is not affected by the load
It has the function of gyratory super strength detection and function
Strong anti-interference ability
High-precision frequency output, synchronous excitation, uniform table vibration
It conforms to European and American ISTA and national GB/T transportation standards
Schematic diagram of a simulated automobile transport testing machine
ZhongLiDongKe RT-S100L Vibration testing machineSpecifications
| LIST | VALUE |
|---|---|
| Frequency modulation range (Hz) | 1.2~5 |
| Speed range (rpm) | 100~300 |
| Maximum Acceleration (m/s2) | 13 |
| Maximum test load (kg) | 100 |
| Displacement amplitude (mmp-p) | 25.4mm |
| vibration waveform | sine wave |
| vibration axis | Rotational vibration |
| Excitation mode | Motor excitation |
| Cooling mode | air-cooled |
| Control mode of vibration | closed loop control |
| Data acquisition method | Vibration data collection + Speed Sensors |
| Speed Sensors | 1 (Shaker Table) |
| operating mode | Fixed frequency mode, sweep mode, multi-segment mode |
| Sweep mode | linear |
| Operation mode | Computer control (including computer set) + Chinese and English Operating system |
| Operating temperature requirement (℃) | 0~+40 |
| Operating humidity requirement (% RH) | 0-90, no condensation |
| power requirements | Single phase AC 220V/50Hz +/- 10% |
| System Power Consumption (KVA) | 2.5 |
| Work surface material | stainless steel |
| Total Weight of the platform (kg) | 150 |
| Work surface size W.D.H (mm) | 1200×1000×32 |
| Table size W.D.H (mm) | 1200×1000×450 |
ZhongLiDongKe RT-S100L Vibration testing machine Packing list
Host X1, manual X1, certificate X1, warranty card X1, simple fixture X1, power cord X1, control cable X1, U disk X1, computer (computer host + monitor + keyboard and mouse set) X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.