Factory Rgdc-01.2/400 Soaking coil coater DATASHEET
| Brand | Factory | Model | Rgdc-01.2/400 |
|---|---|---|---|
| From | China | Name | Soaking coil coater |
Specifications
| Spreader process | Rolling → soaking → scraping → drying → film laminating → winding |
| Coating method | soaking + scraping |
| Coating speed | 0.1~ 300mm/min (adjustable) |
| Coating size | ≤400mm |
| Width of guide roller | 400mm |
| scraping thickness | 0.001-3Mm (adjustable) |
| Film Accuracy | ±5% |
| Graduation | 0.001mm |
| percentile | digital display |
| Spreader thickness control | manual |
| Bath size | 1000 * 400 * 500Mm (length * width * height) |
| Dip coating type | Solution soaking (Note: After the substrate is crystallized in solution, it can be rolled around the tape) |
| Dip coating material | Resistant corrosion stainless steel (note, the solution cannot react chemically with the material) |
| Number of baths | 1 |
| Drying tunnel size | 1200Mm * 400 * 500 (length * width * height) |
| Drying tunnel temperature | Room temperature~ 200 ℃ adjustable |
| Heating mode | hot air circulation |
| Oven length | 1.2M/section |
| Total length of drying tunnel | 1.2m |
| Drying Power | 1KW/section |
| Fitting method | Roll fit |
| Fitting speed | 0.1~ 300mm/min (adjustable) |
| fit width | Max.Φ400mm |
| Motor type | Servo motor |
| Control mode | PLC + touch screen |
| Human Machine Interface | Color touch screen |
| unwinding method | Inflatable shaft unwinding |
| winding method | Inflatable shaft winding |
| Outer diameter of winding air expansion shaft | 3-Inch expansion shaft, load-bearing 50KG |
| Unwinding outer diameter | Max. Ф400mm |
| winding outer diameter | Max. Ф400mm |
| Tension Control mode | automatic |
| Control mode | automatic |
| tension control | Automatic constant tension (1-10N) |
| Correction Accuracy | ±1mm |
| Applicable coil type | Plastic film, paper, non-woven fabric, etc |
| Spreader type | Water-based paints, solar-based paints, UV coatings, etc |
| Dimension | 5000Mm * 600mm * 1600mm (subject to actual customization) |
| Weight | 0.5T (subject to actual customization) |
| Power Supply | Single Phase AC220V +/- 10%, Frequency 50Hz, Power 9.5KW |
| gas source | 0.5~ 0.8MPa compressed air |
Packing list
Whole machine x1
After-sales instructions
Warranty days: 365 days
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/49631/Specification.html , which is only used by users who purchase commodities from the NBCHAO.
Created on : 2025/12/17