DZ-TGA103 Thermal Gravimetric Analyzer RT +~ 1350 ℃

Product Introduction

Thermogravimetric analysis (TG, TGA) is the observation of the mass of a sample as a function of temperature or time during the process of heating, constant temperature or cooling, with the purpose of studying the thermal stability and composition of the material. It is widely used in research and development, process optimization and quality control in various fields such as plastics, rubber, coatings, catalysts, inorganic materials, metal materials and composite materials.

Structural advantages

1. The furnace body is heated by double row winding of precious metal alloy wire, which reduces interference and is more resistant to high temperature.

2. The pallet sensor is made of precious metal alloy disc precision, which has the advantages of high temperature resistance, oxidation resistance, corrosion resistance and so on.

3. The power supply, circulating heat dissipation part and the main unit are separated, reducing the influence of heat and vibration on the microthermal balance.

4. It adopts the upper cover structure, which is easy to operate, and has an exhaust gas output port, which is convenient for expanding and connecting infrared and other equipment.

5. The main engine is used to isolate the thermal influence of the heating furnace on the chassis and the micro-heat balance.

6. The furnace body adopts double insulation, and the linearity is better

7. Imported weighing system, using ceramic rod to connect with the sample tray, can be plugged and unplugged; The sample holder can be changed according to different experiments to meet different testing needs.

Controller, software advantages

1. Imported ARM processor, sampling speed, processing speed is faster.

2. Four-way sampling AD collects TG signal and temperature T signal.

3. Heating control, different from the relay heating method on the market, adopts PID algorithm to accurately control the temperature. At the same time, it can be measured for cooling scanning

4. USB two-way communication is used between the software and the instrument, which fully realizes remote operation, and the parameter setting of the instrument and the operation stop of the instrument can be carried out through the computer software.

5. 7 inch full-color 24bit touch screen, better man-machine interface. The calibration of the TG is possible on the touch screen

Comply with industry standards

• Plastics Polymer thermogravimetric method: GB/T 33047.3-2021

• Education Methods for Thermal Analysis: JY/T 0589.5-2020

• Determination of raw rubber content of neoprene composite rubber: SN/T 5269-2019

• Thermogravimetric analysis of agricultural biomass feedstocks: NY/T 3497-2019

• Determination of rubber ash: GB/T 4498.2-2017

• Nanotechnology Thermogravimetric characterization of single-walled carbon nanotubes: GB/T 32868-2016

• Test method for vinyl acetate content in ethylene-vinyl acetate copolymer for photovoltaic modules Thermogravimetric analysis method: GB/T 31984-2015

• Test Method for Rapid Thermal Aging of Impregnated Varnish and Lacquered Cloth for Electrical Insulation: JB/T 1544-2015

• Determination of the composition of vulcanized rubber and unvulcanized rubber by thermogravimetric analysis of rubber and rubber products: GB/T 14837.2-2014

• Thermogravimetric analysis of oxidation temperature and ash content of carbon nanotubes: GB/T 29189-2012

• Determination of starch content in starch-based plastics: QB/T 2957-2008

(Some industry standards are displayed)

thermogravimetric host X1, U disk X1, data cable X2, power cord X1, ceramic crucible X200, ceramic cover X2, metal cover X1, raw tape X1, standard tin X1, 10A fuse X5, sample spoon/sample pressure rod/forceps X1, dust cleaning ball X1, trachea X2, manual X1, warranty X1, certificate X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.