JINGKELIAN QXP 0-50S ISO Fineness of Ground Gauge Fineness gauge 0~50μm/5μm
Double-channel, range 0~50μm, scale unit μm, scraper material stainless steel, scraper size 175mm * 65mm * 13mm, groove size 140 * 12.5mm, drawdown blade material stainless steel, can be used to determine the fineness of pigments, fillers and impurities in Coatings, in microns.
JingKeLian
QXP 0-50S
QXP 0-25S
QXP 0-50
QXP 0-100S
-
MODERNER QXD-50 small double-channel qxd Fineness gauge 50 micron Coating Fineness gauge
Login -
JINGKELIAN QXP 0-100um double-channel Fineness of Ground Gauge 0~100μm
$ 183.00 -
JINGKELIAN QXP 0-50 single-channe Fineness of Ground Gauge Fineness gauge 0~50μm/5μm
$ 148.00 -
JINGKELIAN QXD (0-100um Stainless Steel) Fineness of Ground Gauge 0~100μm/5μm
$ 133.00 -
JINGKELIAN QXP 0-25S ISO Fineness of Ground Gauge Fineness gauge 0~25μm/2.5μm
$ 192.00
Introduction
The Fineness Meter is designed according to the standard paint inspection method promulgated by the Ministry of Chemical Industry, the Fineness Meter measurement method GB/T6753.1-86 ISO1524-83 standard, and can be used to test the particle size of pigments, fillers and impurities in paints and paint pastes. Fineness, expressed in microns.
JingKeLian QXP 0-50S ISO double-channel Fineness of Ground GaugeSpecifications
| LIST | VALUE |
|---|---|
| Scraper type | double-channel |
| Number of grooves | 2 |
| range | 0 ~ 50µm |
| Scale unit | mm |
| Scraper material | stainless steel |
| Scraper size | 175mm*65mm*13mm |
| Groove size | 140mm*12.5mm |
| Scraper material | stainless steel |
| Scraper size | 90*40*6mm |
| Applicable standard | GB/T6753.1-86、ISO1524-83 |
| slope | 1:3000 |
| Graduation | 5μm |
| Flat flatness on scraper | 0.003mm |
| Scraper two knife edge plane flatness | 0.002mm |
| Roughness of plane surface on scraper | Ra≤0.2 |
| Chute Surface Roughness | Ra≤0.5 |
| Scraper two edge finish | Ra≤0.2 |
JingKeLian QXP 0-50S ISO double-channel Fineness of Ground Gauge Packing list
Scraper x1, doctor blade x2
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- IncomingGB/T 17001.3-2025
- ActiveHG/T 5173-2017
- ActiveWJ 2669-2005
- ActiveGB/T 42541-2023
- ActiveGB/T 17001.6-2022
- AbolishTB/T 2260-1991
- ActiveHG/T 5370-2018
- ActiveHG/T 5367.1-2018
- ActiveHG/T 5183-2017
- ActiveHG/T 5180-2017
- ActiveHG/T 5175-2017
- ActiveHG/T 3349-2003
- ActiveASTM D1316-2020
- ActiveGB/T 5211.17-1988
- ActiveASTM D333-2021
- ActiveHG/T 4758-2014
- AbolishGB/T 13217.3-2008
- ActiveHG/T 2243-1991
- ActiveGB/T 13492-1992
- ActiveGB/T 17459-1998