JingKeLian QXP 0-25S ISO double-channel Fineness of Ground Gauge

JINGKELIAN QXP 0-25S ISO Fineness of Ground Gauge Fineness gauge 0~25μm/2.5μm

Double-channel, range 0~25μm, scale unit μm, scraper material stainless steel, scraper size 175mm * 65mm * 13mm, groove size 140 * 12.5mm, used to determine the fineness of pigments, fillers and impurities in Coatings, in microns.

Brand

SKU: NB004987

JingKeLian

Model

Price

$ 192.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

JingKeLian shopSE

Information

Datasheet RFQ Contract Video Manual

What else did others buy

Genuinegoods

JingKeLian QXP 0-25S ISO double-channel Fineness of Ground GaugeOverview
Specifications
Comments
FAQs

QXP 0-25S

ISO double-channel Fineness of Ground Gauge

Introduction

The Fineness Meter is designed according to the standard paint inspection method promulgated by the Ministry of Chemical Industry, the Fineness Meter measurement method GB/T6753.1-86 ISO1524-83 standard, and can be used to test the particle size of pigments, fillers and impurities in paints and paint pastes. Fineness, expressed in microns.

Details of JinKeLian QXP 0-25S ISO Fineness of Grind Gauge 1

JingKeLian QXP 0-25S ISO double-channel Fineness of Ground GaugeSpecifications

LIST	VALUE
Scraper type	double-channel
Number of grooves	2
range	0 ~ 25µm
Scale unit	mm
Scraper material	stainless steel
Scraper size	175mm65mm13mm
Groove size	140mm*12.5mm
Scraper material	stainless steel
Scraper size	90406mm
Applicable standard	GB/T6753.1-86、ISO1524-83
Groove ratio	1:3000
Graduation	5μm
Flat flatness on scraper	0.003mm
Scraper two knife edge plane flatness	0.002mm
Roughness of plane surface on scraper	Ra≤0.2
Chute Surface Roughness	Ra≤0.5
Scraper two edge finish	Ra≤0.2

JingKeLian QXP 0-25S ISO double-channel Fineness of Ground Gauge Packing list

Scraper x1, doctor blade x2

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

I don't know how big the fineness is. The 0-15 microns and 0-100 microns we use now cannot be measured. There are particles after grinding

[A]

This depends on the distribution of scraper particles. If it is a few, it may be affected by impurities. If it is more, it is recommended to grind finer.

[Q]

Does this Sophisticated Scraper Fineness Meter come with two scrapers?

[A]

Hello, yes.

[Q]

Does the ISO Fineness gauge meet the specifications of GB/T13217.3?

[A]

Model QXP 0-25SISO Fineness gauge

[Q]

Can the QXP25S Fineness gauge be used to scrape pigments around 19μm?

[A]

Yes, the ISO scraper fineness Measurement can scrape 0~ 25μm or less material fineness.

+JingKeLian QXP 0-25S ISO double-channel Fineness of Ground Gauge Big data

+JingKeLian QXP 0-25S ISO double-channel Fineness of Ground GaugeSimilar products

+JingKeLian QXP 0-25S ISO double-channel Fineness of Ground GaugeStandard

+Navigation

JINGKELIAN QXP 0-25S ISO Fineness of Ground Gauge Fineness gauge 0~25μm/2.5μm

JingKeLian QXP 0-25S ISO double-channel Fineness of Ground GaugeOverview

Introduction

JingKeLian QXP 0-25S ISO double-channel Fineness of Ground GaugeSpecifications

JingKeLian QXP 0-25S ISO double-channel Fineness of Ground Gauge Packing list

FAQ