JingKeLian QXD 0-100 Fineness of Ground Gauge

JINGKELIAN QXD (0-100um Stainless Steel) Fineness of Ground Gauge 0~100μm/5μm

Single-channe, range 0~100μm, scale unit μm, Graduation 5μm, scraper material stainless steel, used to determine the fineness of pigments, fillers and impurities in Coatings, in microns.

Brand

SKU: NB004988

JingKeLian

Model

Price

$ 133.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

JingKeLian shopSE

Information

Datasheet RFQ Contract Video Manual

What else did others buy

Pushen QXD-100um single-channe Lithium Battery Paste Fineness of Ground Gauge 0-100μm

$ 161.00
JINGKELIAN QXP 0-50μm ISO single-channe Fineness of Ground Gauge with Third Party Measurement Certificate

$ 210.00
CHINA QXD-50 Zirconia Ceramic Fineness gauge double-channel Fineness gauge 0~50μm

$ 459.00
MODERNER QXD-100 single-channe Fineness meter, corrosion-resistant stainless steel 0~100μm range

Login
MODERNER QXD-100 Large double-channel lithium battery paste Fineness gauge Fineness range 0~100μm

Login

Genuinegoods

JingKeLian QXD 0-100 Fineness of Ground GaugeOverview
Specifications
Comments
FAQs

QXD 0-100

Fineness of Ground Gauge

Single-channe, range 0~100μm, scale unit μm, Graduation 5μm, scraper material stainless steel, used to determine the fineness of pigments, fillers and impurities in Coatings, in microns.

Introduction

The Fineness Meter is designed according to the standard paint inspection method promulgated by the Ministry of Chemical Industry: Fineness Meter measurement method GB1724-79, which can be used to test the fineness of pigments, fillers and impurities in paints and paint pastes, expressed in microns .

Uses: Determination of particle fineness of fuel filling and impurities in paints, varnishes and inks

JingKeLian QXD 0-100 Fineness of Ground GaugeSpecifications

LIST	VALUE
Scraper type	Single-channe
Number of grooves	1
range	0 ~ 100µm
Scale unit	mm
Graduation	5μm
Scraper material	stainless steel
Scraper size	1555012mm
Groove size	13*120mm
Scraper material	stainless steel
Scraper size	68×40×6.5mm
Applicable standard	GB1724-79
Surface finish on scraper	10
Chute bottom surface finish	8
Scraper two edge finish	8
Scraper two knife edge plane flatness	0.002mm
Flat flatness on scraper	0.003mm
Bottom plane flatness of chute	0.003mm

JingKeLian QXD 0-100 Fineness of Ground Gauge Packing list

Scraper x1, doctor blade x2

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

What material is this QXD Fineness gauge made of?

[A]

Hello, this material is stainless steel.

[Q]

I want to measure the cleanliness of emulsion paint. Is this Fineness Meter suitable?

[A]

The number of particles in the emulsion paint above the Fineness meter reading is suitable for indicating the cleanliness of the emulsion paint and is therefore appropriate.

[Q]

What specifications of Fineness gauge do primers generally use?

[A]

Fineness requirements for primers are generally not higher than 50μm/60μm, and a Fineness gauge with a range of 0 to 100 can be used, either single-channe or double-channel.

[Q]

I want to do a test on the GB/T14616 standard. Is this Fineness gauge okay?

[A]

Sure

[Q]

Can the QXD100 single-channe Fineness gauge test slurries around 75 microns?

[A]

Yes, the scraper fineness Measurement can scrape the material fineness below 0~ 100μm.

+JingKeLian QXD 0-100 Fineness of Ground Gauge Big data

+JingKeLian QXD 0-100 Fineness of Ground GaugeSimilar products

+JingKeLian QXD 0-100 Fineness of Ground GaugeStandard

+Navigation

JINGKELIAN QXD (0-100um Stainless Steel) Fineness of Ground Gauge 0~100μm/5μm

JingKeLian QXD 0-100 Fineness of Ground GaugeOverview

Introduction

JingKeLian QXD 0-100 Fineness of Ground GaugeSpecifications

JingKeLian QXD 0-100 Fineness of Ground Gauge Packing list

FAQ