JINGKELIAN QXD (0-25um cr12 molybdenum vanadium) Grindometer Fineness gauge 0~25μm/2.5μm
JINGKELIAN QXD0-25um Grindometer is made of molybdenum vanadium, in line with GB1724 standard, is a single-channe Fineness Meter, QXD0-25um Graduation of 2.5 microns, chute size of 13 × 120mm.
JingKeLian
QXD 0-25 (cr12 molybdenum vanadium)
-
JINGKELIAN QXP 0-50 single-channe Fineness of Grind Gauge Fineness gauge 0~50μm/5μm
$ 149.00 -
JINGKELIAN QXP 0-25μm ISO single-channe Fineness of Grind Gauge with Third Party Measurement Certificate
$ 222.00 -
TQC VF2109 single-channe grinding Fineness of Grinding Gauge 0~500μm
$ 1664.00 -
TQC VF2107 single-channe grinding Fineness of Grinding Gauge 0~100μm with calibrated certificate
$ 1123.00 -
CHINA QXD-15 single-channe Grindometer Zirconia Ceramic Material 0~15μm
$ 431.00
Introduction
This Fineness Meter is designed according to the standard coating inspection method issued by the Ministry of Chemical Industry: Fineness meter determination method GB1724-79. It can be used to test the fineness of pigments, fillers and impurities in paints and paint slurries, expressed in microns. .
Purpose: Determine the particle size of fuel filling and impurities in paints, paint slurries and inks
Product picture display
JingKeLian QXD 0-25 (cr12 molybdenum vanadium) Fineness of Grind GaugeSpecifications
| LIST | VALUE |
|---|---|
| Scraper type | Single-channe |
| Number of grooves | 1 |
| range | 0~25μm |
| Scale unit | μm |
| Graduation | 2.5μm |
| scraper material | Molybdenum Vanadium |
| Scraper size | 155*50*12mm |
| Groove size | 13*120mm |
| Drawdown blade size | 68*40*6.5mm |
| Applicable standards | GB1724-79 |
| Surface finish on scraper | 10 |
| Chute bottom surface finish | 8 |
| Drawdown blade two knife edge finish | 8 |
| Drawdown blade two knife edge plane flatness | 0.002mm |
| Flat flatness on scraper | 0.003mm |
| Plane flatness of chute bottom | 0.003mm |
JingKeLian QXD 0-25 (cr12 molybdenum vanadium) Fineness of Grind Gauge Packing list
Scraper x1, doctor blade x2
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveGB/T 17473.2-2008
- ActiveHG/T 5776-2020
- ActiveHG/T 5370-2018
- ActiveHG/T 5175-2017
- ActiveQB/T 2025-2013
- ActiveASTM D1316-2020
- ActiveASTM D333-2021
- AbolishGB/T 13217.3-2008
- ActiveGB/T 13492-1992
- ActiveGB/T 17459-1998