JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind Gauge

JINGKELIAN QXD 0-100 Grindometer cr12 Molybdenum Vanadium Fineness gauge 0~100μm/5μm

JINGKELIAN QXD 0-100 Fineness of Grinding Gauge is made of cr12 molybdenum vanadium material, with a range of 0~100 microns and a Graduation of 5.0 microns. QXD 0-100 is suitable for the fineness detection of impurity particles such as Coatings, pigments, and paint slurries.

Brand

SKU: NB004992

JingKeLian

Model

QXD 0-100 (cr12 molybdenum vanadium)

Service

JingKeLian shop

Information

Datasheet Manual

What else did others buy

Genuinegoods

JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind GaugeOverview
Specifications
Comments
FAQs

QXD 0-100 (cr12 molybdenum vanadium)

Fineness of Grind Gauge

Introduction

This Fineness Meter is designed according to the standard coating inspection method issued by the Ministry of Chemical Industry: Fineness meter determination method GB1724-79. It can be used to test the fineness of pigments, fillers and impurities in paints and paint slurries, expressed in microns. .

Purpose: Determine the particle size of fuel filling and impurities in paints, paint slurries and inks

Product picture display

JinKeLian QXD 0-100 (cr12 molybdenum vanadium) scraper Fineness Meter details picture 1

JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind GaugeSpecifications

LIST	VALUE
Scraper type	Single-channe
Number of grooves	1
range	0~100μm
Scale unit	μm
Graduation	5.0μm
scraper material	CR12 Molybdenum Vanadium
Scraper size	1555012mm
Groove size	13*120mm
Drawdown blade size	68406.5mm
Applicable standards	GB1724-79
Surface finish on scraper	10
Chute bottom surface finish	8
Drawdown blade two knife edge finish	8
Drawdown blade two knife edge plane flatness	0.002mm
Flat flatness on scraper	0.003mm
Plane flatness of chute bottom	0.003mm

JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind Gauge Packing list

Scraper x1, doctor blade x2

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

What solvent will be used for cleaning the general scraper Fineness meter? Is it okay to clean with alcohol?

[A]

Hello, it is OK to clean with alcohol, and Miscellaneous solvents without corrosive substances are also OK.

[Q]

I want to measure the cleanliness of emulsion paint. Is this Fineness Meter suitable?

[A]

The number of particles in the emulsion paint above the Fineness meter reading is suitable for indicating the cleanliness of the emulsion paint and is therefore appropriate.

[Q]

What specifications of Fineness gauge do primers generally use?

[A]

Fineness requirements for primers are generally not higher than 50μm/60μm, and a Fineness gauge with a range of 0 to 100 can be used, either single-channe or double-channel.

[Q]

Fineness gauge can be applied to GB/T13217.3?

[A]

[Q]

Can the QXD100 single-channe Fineness gauge measure the size of 75 μm?

[A]

Yes, the scraper fineness Measurement can scrape 0~ 100μm or less material fineness.

+JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind Gauge Big data

+JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind GaugeSimilar products

+JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind GaugeStandard

+Navigation

JINGKELIAN QXD 0-100 Grindometer cr12 Molybdenum Vanadium Fineness gauge 0~100μm/5μm

JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind GaugeOverview

Introduction

Product picture display

JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind GaugeSpecifications

JingKeLian QXD 0-100 (cr12 molybdenum vanadium) Fineness of Grind Gauge Packing list

FAQ