JINGKELIAN QXD 50-150 Grindometer cr12 Molybdenum Vanadium Fineness gauge 50-150μm/10μm
JINGKELIAN QXD 50-150 Grindometer material is cr12 molybdenum vanadium, is a single-channe Fineness gauge, Graduation is 10 microns, QXD 50-150 conforms to GB1724 standard, drawdown blade size 68 × 40 × 6.5mm, chute 13 × 120mm.
JingKeLian
QXD 50-150 (cr12 molybdenum vanadium)
-
Pushen ISO-150um double-channel ISO Fineness Gauge 0-150μm
$ 196.00 -
PUSHEN ADM-II Automatic scraper
$ 1324.00 -
MODERNER QXD-15 single-channe Fineness gauge stainless steel material 0~15μm range
Login -
Erichsen 232 Grindometer 0~25μm double-channel Fineness gauge
$ 823.00 -
MODERNER QXD-300 single-channe Fineness gauge 0~300μm (customized)
Login
Introduction
This Fineness Meter is designed according to the standard coating inspection method issued by the Ministry of Chemical Industry: Fineness meter determination method GB1724-79. It can be used to test the fineness of pigments, fillers and impurities in paints and paint slurries, expressed in microns. .
Purpose: Determine the particle size of fuel filling and impurities in paints, paint slurries and inks
Product picture display
JingKeLian QXD 50-150 (cr12 molybdenum vanadium) Fineness of Grind GaugeSpecifications
| LIST | VALUE |
|---|---|
| Scraper type | Single-channe |
| Number of grooves | 1 |
| range | 50~150μm |
| Scale unit | μm |
| Graduation | 10μm |
| scraper material | CR12 Molybdenum Vanadium |
| Scraper size | 155*50*12mm |
| Groove size | 13*120mm |
| Drawdown blade size | 68*40*6.5mm |
| Applicable standards | GB1724-79 |
| Surface finish on scraper | 10 |
| Chute bottom surface finish | 8 |
| Drawdown blade two knife edge finish | 8 |
| Drawdown blade two knife edge plane flatness | 0.002mm |
| Flat flatness on scraper | 0.003mm |
| Plane flatness of chute bottom | 0.003mm |
JingKeLian QXD 50-150 (cr12 molybdenum vanadium) Fineness of Grind Gauge Packing list
Scraper x1, doctor blade x2
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveHG/T 5175-2017
- ActiveASTM D1316-2020
- ActiveASTM D333-2021
- AbolishGB/T 13217.3-2008
- ActiveGB/T 17459-1998