YIBAI CTG-802-3000FNV split iron and aluminum dual-use standard large V-shaped Coating Thickness Gauge
Using magnetic Induction and eddy Current automatic conversion technology, Measurement range 0~3000μm, resolution 0.1μm, with super wear-resistant carbide probe, wear-resistant more than 500,000 times, Measurement speed 0.3 seconds/time.
YiBai
CTG-802-3000FNV split iron-aluminum dual-use standard large V type
-
LANDTEK CM8856 Surface platings Thickness Gauge F magnetic Induction /NF eddy current split platings Thickness Gauge
$ 489.00 -
LANDTEK CM8829F magnetic Coating Thickness Gauge split thickness range 0~3mm
$ 444.00 -
LANDTEK CM8821 Coating Thickness Gauge measurement of non-magnetic conductive coatings on ferromagnetic metal substrates
$ 234.00 -
Germany EPK FN 2/90 dual-use right-angle probe, thickness measurement range 0~2000um
$ 2357.00 -
Qnix NFe5mm eddy Current Thickness Probe 5000 μm
$ 996.00
Product Introduction
CTG-802-3000FNV is a split coating Thickness Gauge for both iron and aluminum, which can automatically identify the substrate and adopts magnetic induction and eddy current automatic conversion technology. The measurement method is in line with the international standard ISO2178, ISO2360 and national standards GB4956, GB4957. It can be used for fast, non-destructive, and precise measurement of coating and coating thickness, both in the laboratory and in the engineering field. This instrument is widely used in manufacturing, metal processing industry, chemical industry, commodity inspection and other testing fields, and is a common instrument for material protection.
Instrument features:
The thickness of non-magnetic overlays (such as aluminum, chromium, copper, zinc, enamel, rubber, paint, powder, etc.) on magnetic metal substrates (such as steel, iron, alloys and hard magnetic steels, etc.) and the thickness of non-conductive overlays (enamel, rubber, paint, plastic, etc.) on non-magnetic metal substrates (such as copper, aluminum, zinc, tin, etc.) can be measured non-destructively.
The spring-loaded sleeve probe with ultra-wear-resistant carbide probe can also ensure that the probe has constant pressing force and stable sampling value when measuring on hard or rough surfaces, and the probe is wear-resistant for more than 500,000 times.
The measurement speed can reach 0.3 seconds/time.
High accuracy, good stability, can measure 1-5μm ultra-thin coating.
Wide measurement range and high resolution.
The light touch measurement accuracy is good.
It can quickly and automatically identify magnetic and non-magnetic substrates.
Integrated structure, small size and light weight.
It adopts a dot matrix backlight display with no parallax, making it suitable for night use.
This instrument is equipped with automatic shutdown to achieve power saving function.
YiBai CTG-802-3000FNV split iron-aluminum dual-use standard large V type Coating Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Display | LCD point array LCD screen |
| Measurement range | 0~3000μm |
| Measurement range | 0-2000μm，0-3000μm |
| resolution | 0.1μm（0-99.9μm），1μm（100-3000μm） |
| margin of error | ±2% |
| thinnest matrix | 0.3mm |
| minimum radius of curvature | F: convex 1.5mm, N: convex 3mm |
| Measurement mode | Single measurement and continuous measurement |
| conversion function | With metric and inch unit conversion function, it realizes μm/mil conversion |
| Power Supply | 2 × 1.5V AAA AA batteries |
| Operating environment | -10~50 ℃, Humidity < 80% |
| Host size | 101×61×26mm |
| Weight | Approximately 54g (excluding batteries) |
YiBai CTG-802-3000FNV split iron-aluminum dual-use standard large V type Coating Thickness Gauge Packing list
Host X1, Portable Encasement Box X1, Iron Substrate X1, Aluminum Substrate X1, Large V Sleeve X1, Standard Sheet X5, No. 7 Battery X2, Manual X1, Certificate X1, Warranty Card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.