Factory direct NBC-XF200 extrusion slot-die flat coating machine
Spreader size Max. L200mm * W300mm, substrate Film thickness Max: 5mm, Heating Plate Film thickness 40mm, heating range room temperature -200 ℃, accuracy +/- 2um, viscosity 100-7000mPas, bottom heating range 0-200 ℃, temperature control accuracy +/- 1 ℃.
Factory
NBC-XF200
-
HuiNuo TM3000/15 bar drawdown blade coater effective area 100 * 60cm stepper motor
Login -
HUINUO TM3300 metering rod & drawdown blade heating vacuum adsorption Scraping Machine Four-in-one Film Applicator Customized
$ 7533.00 -
HuiNuo TM3000AK Perovskite Film Applicator bar drawdown blade coater (with air knife)
$ 2869.00 -
HuiNuo TM 2200/04 Drawdown blade vacuum adsorption coater small size size 21 * 15cm
$ 3491.00 -
CHINA TBJ-A1-DJ9 Floor type wire-rod Film Applicator Coating size 600 * 800mm
$ 6289.00
Product Introduction
TG-TB extrusion slit flat coater is a equipment applied to the surface coating of sheet substrates, which can be used for scraper coating, wire rod coating, slit coating, four-sided film maker coating, and other coating processes. It is mainly used in laboratory research and development, and can work in the glove box. This equipment is mainly used for the surface coating of chip substrates in the fields of various types of glue, lithium battery substrates, OLED, solar photovoltaic films and polymer conductive films.
Functional features:
A variety of coating processes are adopted, with high coating accuracy and good consistency.
The coating window is wide, and the viscosity is more applicable.
The coating substrate can be equipped with an optional vacuum suction plate and a built-in Vacuum Pump, so that the substrate can be evenly adsorbed on the surface of the coating board.
The device can be used in an argon atmosphere inside the glove box.
Touch screen operation, equipment parameter adjustment, storage and control are convenient and fast.
A variety of applicators are available.
Process introduction
Brief description of the equipment principle: Different applicators are installed on the coating mobile frame, and the frame drives the applicator to evenly coat the slurry on the substrate.
Extrusion coating
Brief description of the process: After the coating enters the coating die, it flows out at the outlet through pressure distribution and is coated on the surface of the substrate to form the target coating. The coating thickness and size are affected by the feeding speed and coating speed, and the coating accuracy is affected by many factors such as die accuracy, die adjustment accuracy, flatness of the coating plate, movement speed accuracy, feeding accuracy and coating characteristics
Factory NBC-XF200 Extrusion slot-die flat coating machineSpecifications
| LIST | VALUE |
|---|---|
| Spreader size | Max.L200mm*W300mm |
| substrate size | L430mm*W320mm |
| Mechanical speed | Traverse speed 1-200mm/s |
| Film thickness | Max：5mm |
| Feed Capacity | Stainless steel syringe (Max: 60ml) |
| Feeding speed | 0.05-5 mm/s (barrel piston speed) optional |
| Installation size | L740mm*W444mm*H425mm |
| Film thickness | 40mm |
| Heating range | Room temperature -200 ℃ |
| Weight | About 90Kg |
| Accuracy | ±2um |
| viscosity | 100-7000mPas |
| bottom | Heating range 0-200 ℃, temperature control Accuracy +/- 1 ℃ |
| gap | 10Um-10mm adjustable, adjustment Accuracy 1um |
| Coating method | extrusion coating |
| Lip height | 0~5Mm, adjustable |
| Adjustment Accuracy | A. Digital dial: 1um |
| Coating Accuracy | +/- 2μm (reference value depends on slurry characteristics) |
| Die head model | TG-C200 |
| Die head material | SUS630 |
| Die Accuracy | Lip straightness ≤ 3μm |
| cavity Volume | 8ml |
| gasket width | Opening width Max. 200mm |
| Film thickness | 30/50/70/100/200um (Film thickness is selected according to solution viscosity) |
| Power Supply | Single Phase AC110 - 220V +/- 10%, Frequency 50/60Hz, Power 300W |
Factory NBC-XF200 Extrusion slot-die flat coating machine Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.