Factory Rdh-02/350dcblpro Drawdown blade coater DATASHEET
| Brand | Factory | Model | Rdh-02/350dcblpro |
|---|---|---|---|
| From | China | Name | Drawdown blade coater |
Specifications
| Spreader process | Double roll 350mm → scrape coating → soak 1m → disbonding → stoving drying 2m → double roll |
| Effective application width | Max.Φ350mm |
| Coating Method | Adjustable scratch coating |
| Cutting head type | Adjustable thickness |
| Indication Display mode | digital display |
| WFT | 0.005-3mm |
| Regulator Graduation | 0.001mm |
| Spreader Accuracy | ±5% |
| Coating Speed | 1-10M/min (adjustable) |
| unwinding method | Inflatable shaft unwinding |
| winding method | Inflatable shaft winding |
| Outer diameter of winding air expansion shaft | 3-Inch expansion shaft, load-bearing 50KG |
| maximum discharge | Max.Φ350mm |
| Maximum charge | Max.Φ350mm |
| Drying Temperature range | RT+~200℃ |
| Temperature control Accuracy | ±3℃ |
| Heating mode | hot air circulation |
| Oven length | 1M/section * 1 |
| Total length of drying tunnel | 1m |
| Drying Power | 1KW/section |
| Tension control range | Automatic constant tension (1-10N) |
| Tension control Accuracy | ±0.5N |
| Motor type | Servo motor |
| Control mode | PLC + touch screen |
| Human Machine Interface | Color touch screen |
| tension control | automatic |
| Correction control | automatic |
| thickness control | manual |
| soak | With soaking function |
| soaking size | Soak 1 meter |
| disbonding | With disbonding function |
| gas source | 0.5~ 0.8MPa compressed air |
| Applicable coil type | Plastic film, metal foil, paper, non-woven fabric, etc |
| Spreader type | Water-based paints, solar-based paints, UV coatings, etc |
| Application | Encasement, electronics, construction, automotive, medical, etc |
| Operating Environment Temperature | 10℃ ~ 40℃ |
| Operating Environment Humidity | 30～90%RH |
| power requirements | 380V, 50Hz, three-phase five-wire system |
| total power consumption | 45KW (subject to actual customization) |
| Dimension | About 6500mm (the total length of the frame is 3m + 1m oven + 1m soaking + disbonding about 0.5 meters) * 1200mm * 1600mm (subject to actual customization) |
| Power | 10KW |
| safety protection | emergency stop button |
Packing list
machine x1, manual x1, certificate x1
After-sales instructions
Warranty days: 365 days
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/50617/Specification.html , which is only used by users who purchase commodities from the NBCHAO.
Created on : 2025/12/31