Linshang F2000-X2 thickness gauge 90 ° long rod Probe tube inner wall fine groove measurement
Magnetic Induction Iron Based Probe, 90 ° Long Rod, For Tube Inner Wall, Slot Coated platings measurement, Plug-in, Digital Probe, High Hardness Probe
LinShang
F2000-X2
NF2000-X2
FNF2000-X1
FNF20000-X0
FNF5000-X0
FNF2000-X0
F600-X0
-
German EPK MikroTest Ni100 McCourt coated platings Thickness Gauge, thickness measurement: 0~100μm
$ 2117.00 -
LANDTEK CTG-CF coating calibrated diaphragm
$ 112.00 -
LINSHANG LS-225-JIJIA hand pressure testing device rack
$ 371.00 -
LANDTEK CM8821 Coating thickness gauge measurement of non-magnetic conductive coatings on ferromagnetic metal substrates
$ 246.00 -
AMITTARI AC-110CS Coating thickness gauge
$ 360.00
Product Introduction
F2000-X2 It is the principle of magnetic induction Iron base The thickness gauge probe is a type of The 90° long rod probe is suitable for measuring the coating thickness of pipe inner walls and fine grooves, and is an optional probe for the LS227 coating thickness gauge.
Meets the standards
GB/T 4956-2025 Measurement of Thickness of Non-magnetic Covering Layer on Magnetic Substrate—Magnetic Method
GB/T 4957-2025 Measurement of Non-conductive Coating Thickness on Non-Magnetic Matrix Metals - Amplitude-Sensitive Eddy Current Method
DIN EN ISO 2808 Determination of coating and varnish film thickness
JJG-818-2018 Verification Procedures for Magnetic and Eddy Current Cover Thickness Measuring Instruments
Product features
1. Plug-in probe design.
2. Utilizes advanced digital probe technology, with digital signal processing performed directly on the probe, making the probe less susceptible to interference and providing excellent testing accuracy.
3. High-hardness probe ensures long-term effective use of the instrument
Probe selection
| Probe model | Range | Features |
| F600-X0 | 0-600μm | Iron-based, straight probe, ultra-small probe, suitable for measuring the thickness of thin coated coatings on small workpieces |
| NF1600-X0 | 0-1600μm | Non-iron-based, straight probe, ultra-small probe, suitable for anodized layer measurement on small workpieces |
| FNF2000-X0 | 0-2000μm | Dual-base, straight probe, standard range, suitable for coating and paint thickness measurement |
| FNF5000-X0 | 0-5000μm | Dual-base, straight probe, large range, suitable for coating and paint thickness measurement |
| FNF20000-X0 | 10-20000μm | Dual-base, straight probe, ultra-wide range, suitable for measuring fireproof coatings and coating thickness |
| FNF2000-X1 | 0-2000μm | Dual-base, 90° right-angle probe, suitable for measuring coating thickness on holes and slits |
| F2000-X2 | 0-2000μm | Iron-based, 90° long rod probe, suitable for measuring coating thickness on pipe inner walls and fine grooves |
| NF2000-X2 | 0-2000μm | Non-iron-based, 90° long-rod probe, suitable for measuring coating thickness on pipe inner walls and fine grooves |
Actual test demonstration
LinShang F2000-X2 Coating thickness gauge (Coating Thickness Gauge)Specifications
| LIST | VALUE |
|---|---|
| Probe type | 90 ° long pole |
| Measurement principle | magnetic Induction |
| matrix material | Ferromagnetic metal |
| Measurement range | 0.0~2000μm |
| resolution | 0.1μm：(0μm - 99.9μm)，1μm：(100μm - 2000μm) |
| accuracy | H < 1000 μm ： +/- ( 2% H + 1 μm), H ≥ 1000 μm: +/- 3% H (five point calibrated, H is the Standard value) |
| time interval | 0.6s |
| minimum matrix thickness | 0.2mm |
| minimum radius of curvature | straight |
| Probe weight | About 46g |
LinShang F2000-X2 Coating thickness gauge (Coating Thickness Gauge) Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.