MODERNER SZQ-1000 Film Applicator 1000 μm Moulding

Overview of SZQ-1000 Wet Film Applicator

MODERNER SZQ-1000 (ISO bird type) Wet Film Applicator conforms to the ISO standard. The thickness of the wet film is determined by the groove depth of the Wet Film Applicator. It is made of high-grade stainless steel, which presents the advantages of corrosion resistance and high hardness, and is durable durable. ISO Wet Film Applicator is mainly used to coat wet film with specified thickness to measure the hiding power, color and other properties of paint samples. It is widely used in paint and ink industry, with uniform film production and high quality.

Materials used

SZQ-1000 (ISO bird type) Wet Film Applicator is made of 9Cr18Mo high-carbon chromium stainless steel, and 9Cr18 is high-carbon chromium martensitic stainless bearing steel. It has high hardness and wear resistance, high temperature and low temperature dimensional stability.

Hardness value

The hardness value of SZQ Wet Film Applicator is HRC48±2.

Operating procedures

First, place the sample on the platform and fix the sample to ensure that the Wet Film Applicator does not move when it slides over.

Second, according to the required wet film thickness requirements, select a Wet Film Applicator of the corresponding specification, and place it on the short side of the template, close to parallel or at a specified position.

Thirdly, pour about 5 ml of the sample in front of the Wet Film Applicator, press both ends of it with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required thickness.

Fourth, the SZQ-1000 (ISO bird type) Wet Film Applicator is cleaned and dried with a suitable solvent after use, and the surface is coated with oil or petroleum jelly.

Pictures

Applicator x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.