CHIJIU/Mei Yingpu H2010G digital Overhead Stirrer LCD digital display, stirring Power 100W

Description

The H2010G digital display electric mixer is driven by brushless DC motor, single-chip microcomputer control, idle ring speed regulation, stable speed, with a timer of up to 9999 minutes, and the LCD screen displays each function.

Pictures

How to use:

The LCD screen is four digits, and three function arrows can be scrolled on both sides, which point to the speed, timing, and acceleration time, and when the pointing speed arrow appears, the digital display speed, and when the pointing timing arrow appears, the digital display Timer Setting......

Setting: When the machine is plugged in and turned on the power switch, the LCD screen displays the original set speed, press the setting key once, the number jumps, press the rise or fall key, set the speed, press the setting key again, set the Timer Setting with the above method, if you don't need timing, set it to "0", press the setting key again, set the acceleration time in the same way, press the setting key again, the setting is completed, the LCD screen displays the speed just set, if you don't reset it, the three data will be saved for a long time.

Work operation: After the setting is completed, press the stirring button, the stirring indicator light will be on, and the stirrer will automatically reach the set speed from slow to fast within the accelerated time just set. When the timer time comes, the agitator will automatically stop working. If it is running, press the stirring button and the stirrer will stop. When the stirring button is pressed, the blender restarts and the timer restarts.

Speed adjustment in working operation: every time the Operating Conditions change (such as less stirring, liquid viscosity change, etc.) to choose the appropriate speed, so every time you change, the first use, the speed setting should not be too high, if the speed is not suitable, you can directly press the rise or fall button to adjust to the most appropriate speed, but this speed can not be saved, so the next time you use it, you need to set this speed in. The number displayed in the adjustment is the speed to be reached, and when the finger releases the button, the displayed number stabilizes and the actual speed is achieved.

The acceleration time should not be too short, especially when the liquid has viscosity, the stirring volume is large, and the stirring speed is high, the acceleration time is too short, and the agitator is easy to overload.

Precautions

1. When the agitator is used, it should be accelerated slowly from slow to fast, if the straightness of the stirring rod is poor, the speed can not be fast or the soft connecting shaft should be fixed with a support sleeve in the middle.

2. Please do not get too close to the stirrer when working, so as to avoid the danger of clothes and hair being involved;

3. Prevent liquid from splashing out when stirring.

host x1, base x1, cross section x1, column x1, drill wrench x1, instruction manual x1, certificate x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.