PUSHEN HGQ 1 * 10 Multi-blade Cross Hatch Cutter Number of teeth 11 teeth, pitch 1mm

1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.

Brand

SKU: NB005476

Pushen

Model

Price

$ 181.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

Pushen shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

TRUIT TR 5006/2 adhesion cross-cut plate cross-cut number 11

$ 146.00
PUSHEN HGQ 2 * 10 multi-blade, paint film cross-cut Tester number of teeth 11 teeth, spacing 2mm

$ 181.00
TRUIT TR 5001/2 Cross-cut adhesion instrument 1mm/11 teeth

$ 146.00
TQC SP3000 Adhesion Tester Cross-cut Guide Gauge/Baige Plate 6-in-1 Multifunctional Adhesion Tester

$ 346.00
MODERNER QFH 1mm (10 slots) Cross Hatch Cutter 11 blade 1mm pitch

Login

Genuinegoods

Pushen HGQ 1*10 Cross Hatch CutterOverview
Specifications
Comments
FAQs

HGQ 1*10

Cross Hatch Cutter

1Mm cutter tooth spacing, 11 teeth; multi-blade stainless steel swirl/spinning cutter head 1; wooden handle; suitable for 0-60um film thickness; in line with GB/T9286, ISO2409 standards.

Introduction

Pushen HGQ 1mm multi-blade cross scribe is a paint film cross scribe with 11 teeth and 1mm spacing between teeth. The knife teeth are multi-faceted with 6 cutting surfaces and have a long service life. HGQ 1mm multi-blade cross-hatching tool is suitable for hard substrate test pieces less than 60μm.

Pushhen HGQ1mm multi-blade cross grid display

Standards

Comply with GB/T 9286 Paints and varnishes, scratch test of paint film, ISO 2409, ASTM D 3359 standards.

application principle

The paint film scratcher, also known as the hundred grid knife, is used to evenly draw a square of a certain size, and evaluate the adhesion of the coating film to the substrate by evaluating the integrity of the coating film in the square.

Paint film scratcher application

It is mainly used for the determination of the cross-hatch adhesion of coatings, not only for laboratories, but also for construction sites under various conditions.

Pushen HGQ 1*10 Cross Hatch CutterSpecifications

LIST	VALUE
Number of teeth	11 teeth
Tooth spacing	1mm
application standard	ISO 2409、ASTM D 3359、GB/T 9286
Applicable film thickness environment	0 to 60 µm (solid substrate)

Pushen HGQ 110 Cross Hatch Cutter Packing list*

Cross Hatch Cutter x1, 3M tape x1, brush x1, magnifying glass x1, Encasement box x1, 11 teeth 1mm cutter head x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Determination of water-based interior-wall Coating adhesion, is this cross-cutting knife suitable?

[A]

This model is suitable for the determination of water-based inner and outer wall Coating adhesion in architectural coatings. The cross-cut test is mainly carried out with knives, and the firmness of the Coating to the substrate is judged according to the number of squares of the film peeling. Use a sharp blade and a scale steel ruler to cut 11 cuts with a distance of 1mm in the vertical and horizontal directions of the test plate, and the vertical and horizontal cuts intersect into 100 squares. So it is applicable.

[Q]

Find a Multi-Blade Cross Hatch Cutter for ASTMD3359

[A]

This HGQ 1 * 10 Multi-Blade Cross Hatch Cutter is it.

[Q]

Is there any effect of the grease on the Baige knife? Do you want to wipe off the grease when using it? How should it be stored when not in use?

[A]

Hello, the function of grease is to protect the knife head and prevent rust. You need to wipe off the grease when using it. In addition, if you don't use it for a long time, you can apply grease for protection (such as Vaseline).

+Pushen HGQ 1*10 Cross Hatch Cutter Big data

+Pushen HGQ 1*10 Cross Hatch CutterSimilar products

+Pushen HGQ 1*10 Cross Hatch CutterKnowledge

+Pushen HGQ 1*10 Cross Hatch CutterStandard

+Navigation