Germany IKA RW 16 basic overhead electronic Stirrer large stirring capacity of 10L
The German IKA RW 16 basic overhead electron Stirrer is a laboratory Stirrer with a RW 16 Max. stirring capacity of 10 L H2O and a Rotation speed of 40 to 1,200 rpm.
IKA
-
HUXI HJQ-2 Pneumatic Stirrer Screw Impeller Slurry 90mm Rod Length 350mm
$ 1314.00 -
HUXI HJQ-2 Pneumatic Stirrer Three hole Impeller Slurry 70mm Length 300mm
$ 1258.00 -
Muxuan MXF-E750F Low Speed Power LABOratory and Pilot Electric Stirrer 0.75KW/Full Explosion-proof
$ 2877.00 -
HUXI RWD150 LCD Overhead Stirrer, Three Blades Impeller Slurry 70mm Rod Length 350mm
$ 767.00 -
Lanyu E100T Brushless DC Constant Speed Stirrer 20L/2000rpm
$ 627.00
Introduction
Laboratory mixer, suitable for simple work, with a maximum mixing capacity of 10 L H2O and a speed of 40 – 1,200 rpm. It is especially suitable for schools, universities and laboratory tests.
- No need to change gears through gears, infinitely variable speed regulation
- Compact design
- Silent operation
- Safety loops
- Overload protection
Parameters
Maximum stirring capacity (H2O) | 10 l |
Motor input power | 75 W |
Motor output power | 55 W |
Rotational speed display | scale |
Speed range | 40 - 1200 rpm |
Maximum viscosity | 10000 mPas |
Maximum output power of the stirring shaft | 53 W |
Continuous operation time is allowed | 100 % |
Maximum torque of the stirring shaft | 40 Ncm |
Maximum shaft torque (overload) at 60 rpm | 50 Ncm |
At 100 rpm, the maximum torque of the mixing shaft | 48 Ncm |
At 1000 rpm, the maximum torque of the stirring shaft | 34 Ncm |
Rotational speed control | Stepless |
The impeller is fixed | Rotary chuck |
The minimum diameter of the rotor chuck clamping range | 0.5 mm |
The rotor head clamps the maximum diameter | 10 mm |
Hollow shaft, inner diameter | 11 mm |
Hollow shaft (stop-state can be inserted) | be |
Bracket fixation | Bracket?? Extension arm |
Extension arm diameter | 13 mm |
Extend the arm length | 160 mm |
Torque display | No |
Rated torque | 0.4 Nm |
Dimensions | 80 x 222 x 190 mm |
weight | 2.8 kg |
Allowable ambient temperature | 5 - 40 °C |
Relative Humidity is allowed | 80 % |
DIN EN 60529 protection method | IP 42 |
RS 232 interface | No |
Analog output | No |
Voltage | 230 / 115 / 100 V |
frequency | 50/60 Hz |
Instrument input power | 75 W |
IKA RW 16 Overhead Electronic StirrerSpecifications
| LIST | VALUE |
|---|
IKA RW 16 Overhead Electronic Stirrer Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.