Germany IKA Eurostar Stirrer Powerful Control -visc P1 Max. Stirring Capacity 60 liters
The German IKA Eurostar Stirrer is a powerful control type - visc P1 with a Max. stirring Capacity of 60 liters, visc P1 is suitable for high viscosity media, and the Max. Torque at the drill chuck is 10Ncm.
IKA-
Qiwei QW-JB-250S Low Speed Stirrer Electric Lift 500rpm
$ 478.00 -
HUXI JB300-SH digital display constant speed powerbasic stirrer three blades Impeller blade 70mm Rod length 350mm
$ 549.00 -
HUXI RWD50 LABOratory Vertical Stir, One-word Impeller Pulp 50mm Rod length 300mm
$ 546.00 -
HUXI HJQ-2 Pneumatic Liquid Stirrer Four Vane Impeller Slurry 100mm Rod Length 400mm
$ 1269.00 -
HUXI RWD100 Digital Display Electronic Stirring Device, Square Hole Fan Type Impeller Sheet 50mm Rod Length 350mm
$ 658.00
Introduction
The controlled Eurostar mixer P1 is suitable for highly viscous media.
- Maximum torque of 10Ncm at drill chuck
- Microprocessor is used to ensure constant speed operation
- No need to change gears through gears, infinitely variable speed regulation
- Compact design
- Silent operation
- Safety loops
- Overload protection
- Penetrating impellers
- Smooth start-up for enhanced safety
- Digital display of settings and actual speed
- Torque and viscosity display integrated
- Simulation interface to record speed and torque
- RS232 interface
- It can be connected to a PC to control and record speed, torque, etc. through labworldsoft® software

Parameters
Maximum stirring capacity (H2O) | 60 l |
Motor input power | 153 W |
Motor output power | 134 W |
Rotational speed display | LCD |
Speed range | 50 - 1200 rpm |
Maximum viscosity | 70000 mPas |
Maximum output power of the stirring shaft | 126 W |
Continuous operation time is allowed | 100 % |
Maximum torque of the stirring shaft | 100 Ncm |
Maximum shaft torque (overload) at 60 rpm | 100 Ncm |
At 100 rpm, the maximum torque of the mixing shaft | 100 Ncm |
At 1000 rpm, the maximum torque of the stirring shaft | 100 Ncm |
Rotational speed control | Stepless |
The impeller is fixed | Rotary chuck |
The minimum diameter of the rotor chuck clamping range | 0.5 mm |
The rotor head clamps the maximum diameter | 10 mm |
Hollow shaft, inner diameter | 11 mm |
Hollow shaft (stop-state can be inserted) | be |
Bracket fixation | Bracket?? Extension arm |
Extension arm diameter | 16 mm |
Extend the arm length | 200 mm |
Torque display | be |
Rated torque | 1 Nm |
Torque measurement | trend |
Dimensions | 80 x 253 x 190 mm |
weight | 4 kg |
Allowable ambient temperature | 5 - 40 °C |
Relative Humidity is allowed | 80 % |
DIN EN 60529 protection method | IP 42 |
RS 232 interface | be |
Analog output | be |
Voltage | 230 V |
frequency | 50/60 Hz |
Instrument input power | 153 W |
IKA visc P1 StirrerSpecifications
| LIST | VALUE |
|---|
IKA visc P1 Stirrer Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Production process of alkyd blended paint
- Exterior coating production process
- Modified Calcium Ash Powder Technology Coating Production Process
- The prepative method of waterborne Symphony Art Coatings






