Germany IKA Eurostar Stirrer Powerful Control -visc P7 Max. Capacity of stirring 40 liters
Germany IKA Eurostar Stirrer, powerful control type -visc P7, using a 7-stage conductive layer to deal with high viscosity media, without gear shifting, to achieve stepless speed regulation, Max. stirring Capacity of 40 liters.
IKA
-
CHIJIU S312-90 constant speed Stirrer digital display, power is 90W
$ 319.00 -
HUXI RWD150 LCD Overhead Stirrer, Round Three Hole Fan Impeller Slurry 50mm Rod Length 500mm
$ 765.00 -
RWD100 Strong Stirring, Round Six Hole Fan Impeller Slurry 100mm Rod L400mm
$ 679.00 -
HUXI HJQ-2 Vertical Pneumatic Stirrer Circular Six Hole Fan Impeller Slurry 50mm Rod Length 400mm
$ 1268.00 -
ANGNI AM300W-O Laboratory Electric Stirrer 50L/2000rpm
$ 1334.00
Introduction
The controlled Eurostar mixer P7 is suitable for highly viscous media. 7-stage conduction gradient for high-viscosity media
- Microprocessor is used to ensure constant speed operation
- No need to change gears through gears, infinitely variable speed regulation
- Compact design
- Silent operation
- Safety loops
- Overload protection
- Non-penetrating impellers
- Smooth start-up for enhanced safety
- Digital display of settings and actual speed
- Torque and viscosity display integrated
- Simulation interface to record speed and torque
- RS232 interface
Parameters
Maximum stirring capacity (H2O) | 40 l |
Motor input power | 130 W |
Motor output power | 110 W |
Rotational speed display | LCD |
Speed range | 8 - 290 rpm |
Maximum viscosity | 150000 mPas |
Maximum output power of the stirring shaft | 95 W |
Continuous operation time is allowed | 100 % |
Maximum torque of the stirring shaft | 380 Ncm |
Maximum shaft torque (overload) at 60 rpm | 380 Ncm |
At 100 rpm, the maximum torque of the mixing shaft | 380 Ncm |
At 1000 rpm, the maximum torque of the stirring shaft | 380 Ncm |
Rotational speed control | Stepless |
The impeller is fixed | Rotary chuck |
The minimum diameter of the rotor chuck clamping range | 0.5 mm |
The rotor head clamps the maximum diameter | 10 mm |
Hollow shaft (stop-state can be inserted) | not |
Bracket fixation | Bracket?? Extension arm |
Extension arm diameter | 16 mm |
Extend the arm length | 200 mm |
Torque display | be |
Rated torque | 3.8 Nm |
Torque measurement | trend |
Dimensions | 80 x 330 x 190 mm |
weight | 4.9 kg |
Allowable ambient temperature | 5 - 40 °C |
Relative Humidity is allowed | 80 % |
DIN EN 60529 protection method | IP 42 |
RS 232 interface | be |
Analog output | be |
Voltage | 230 / 115 / 100 V |
frequency | 50/60 Hz |
Instrument input power | 130 W |
IKA visc P7 StirrerSpecifications
| LIST | VALUE |
|---|
IKA visc P7 Stirrer Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.