German IKA T18 high speed dissolver basic type, the dispersion amount is 1-1500ml
Germany IKA T18 high speed dissolver is a basic high speed dissolver with a dispersion of 1-1500ml. The motor input Power of the T18 high speed dissolver is 500W, and it is equipped with a Rotation speed meter connection port.
IKA
-
Yaku FS-680 digital display laboratory Disperser manual lift
$ 265.00 -
Qiwei GFJ-0.5 (GFJ-550) LABOratory Small Disperser (High Speed Frequency Conversion)
$ 500.00 -
Xinlinte YJX200 Planetary Mixing & dispersing Machine High viscosity mixer 200g
$ 6650.00 -
MUXUAN MXF-A1.5Q Small batch mixing Disperser Frequency conversion Disperser Full explosion-proof type
$ 1612.00 -
TRUIT TR 2600/2 Coating Rapid Dispersion Testing Machine, Floor Type, Bottle Clip Type
$ 1543.00
Introduction
The new T18 high-speed disperser ULTRA-TURRAX®
- Dispersions from 1 to 1500 ml (H2O)
- High linear speed for a wide range of applications
- Electronic speed control
- Electronic overload protection
- Quick fixation of the dispersion bits
- Equipped with a tachometer connection
Technical parameters
Motor input power | 500 W |
Motor output power | 300 W |
Minimum Capacity (H2O) | 0.001 l |
Maximum Capacity (H2O) | 1.5 l |
Maximum viscosity | 5000 mPas |
Speed range | 3500 - 24000 rpm |
Rotational speed deviation | 1 % |
Rotational speed control | Stepless |
Rotational speed display | scale |
Noise (no dispersion head) | 73 dB(A) |
Extension arm diameter | 13 mm |
Extend the arm length | 175 mm |
The type of operation | Batching |
Dimensions | 65 x 240 x 80 mm |
weight | 1.6 kg |
Allowable ambient temperature | 5 - 40 °C |
Relative Humidity is allowed | 80 % |
DIN EN 60529 protection method | IP 20 |
RS 232 interface | No |
Analog output | No |
Voltage | 220 - 240 / 100 - 120 V |
frequency | 50/60 Hz |
Instrument input power | 500 W |
IKA T18 high speed dissolverSpecifications
| LIST | VALUE |
|---|---|
| Motor Power | Input 500w; output 300w |
| Speed regulation range | 3500~24000rpm |
| Processing Capacity | 0.001~1.5L |
| Power supply Voltage | 220~240/100~120 V |
| Dimension | 65*240*80mm |
| Host Weight | 1.6kg |
| Max. Processing Viscosity | 5000mPa.s |
| Rotation speed deviation | 1% |
| Speed regulation mode | stepless speed regulation |
| Display mode | scale |
| Noise level | 73dB (A) (without dispersion head) |
| Extension arm diameter | 13mm |
| Extend arm length | 175mm |
| Process type | batch processing |
| Operating temperature | 5~40℃ |
| Relative Humidity | 80% |
| Protection level | IP 20 |
| Interface | none |
| analog output | No. |
| Frequency | 50/60 Hz |
IKA T18 high speed dissolver Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Briefly describe the difference between High Speed Disperser and Homogenizer
- Influence of impeller structure of high-speed disperser on rheological properties of coatings
- Water-bomecoating production process
- How to choose the right laboratory disperser?
- What are the types of high-speed disc dispersers?
- What are the types of Coating additives?
- Polyurethane paint production process
- Manufacturing process of thermosetting coating powder
- Waterproof coating technology of asbestos water dispersed asphalt
- Key points of production and preparation of water-bomecoating