Applent AT515 DC resistance Tester DATASHEET
| Brand | Applent | Model | AT515 |
|---|---|---|---|
| From | Name | DC resistance Tester |
Specifications
| Measurement parameter | DC resistance |
| Basic Precision | 0.01% |
| Measurement range | 0.01μΩ~1GΩ |
| signal source | Current range: 1μA~ 1A |
| range | 11 range automatic and manual |
| Measurement speed | 167 times/second, 30 times/second, 10 times/second, 2 times/second |
| Show results | Direct reading, delta ABS, delta% and sorting results |
| Maximum reading | 1200000 |
| correction | Short circuit clearing in full scale |
| comparator | Built-in 14-speed comparator, display and output BIN1~ BIN10, HIGH, IN, LOW sounds |
| trigger method | Internal trigger, manual trigger, external trigger and remote trigger |
| interface | RS232C interface Handler interface (PLC interface) |
| temperature compensation | Precision: 0.2 ℃ Temperature range: 0~80 ℃ |
| test side | 4-Terminal Shielding (including 2 detection terminals and 2 drive terminals) and outer Shielding ground terminals |
| power requirements | Voltage: 198VAC~ 240VAC Frequency: 50Hz Power: Maximum 15VA |
| size | Outer Dimensions (mm): 264 (W) x107 (H) x350 (D) Inner Dimensions: 216 (W) x88 (H) x323 (D) |
| Weight | 4kg |
Packing list
Host x1, ATL501: Four-terminal Kelvin clip test cable x1, ATL108: RS232 communication cable x1
After-sales instructions
Warranty days: 730 days
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/5823/Specification.html , which is only used by users who purchase commodities from the NBCHAO.
Created on : 2025/12/18