PUSHEN WZJ-II T-Bend folding machine, film bending performance test

PUSHEN WZJ-II T-Bend folding machine is mainly used for Color plate, Aluminum Panel bending performance testing, WZJ-II meets GB/T30791, ISO 17132 standards.

Brand

SKU: NB005858

Pushen

Model

WZJ-II

Price

$ 753.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

Pushen shopSE

Information

Datasheet RFQ Contract Catalog

What else did others buy

Pushen QTY-32 Bending Tester

$ 487.00
TQC SP1820 cylindrical mandrel bending Tester, test plate size 180x100mm

$ 3666.00
JINGKELIAN QTY-32-III Film Bending Tester cylindrical mandrel bending test machine, film flexibility

$ 332.00
JFL QZW T type bending test machine, bending machine

$ 618.00
TRUIT TR 5214 Bending Tester

$ 436.00

Genuinegoods

Pushen WZJ-II T-Bend folding machineOverview
Specifications
Comments
FAQs

WZJ-II

T-Bend folding machine

WZJ-II T bending machine

It is mainly used for bending performance testing of color steel, aluminum plates, etc., with compact structure, simple appearance and easy to use.

how to use

Insert one end of the sample about 10 mm, compress the sample, and turn the handle to bend the sample to an acute angle.

Take out the sample and insert it into the vise, and press the curved part of the sample tightly, which is regarded as 0T bending.

Check for cracks on the coating, coating within 5 mm from the edge is not considered.

Stick the scotch tape along the curved surface, tear off the tape along the 60° direction of the curved surface, and check whether there is any peeling coating.

The sample continues to be bent 180° around the 0T bending part, and the center of the folding is 1T bending.

Repeat the above steps until you see the desired result.

Standards

GB/T 30791-2014 Paints and varnishes T-bend test

ISO 17132-2008

Pushhen WZJ-II T bending machine display

Pushen WZJ-II T-Bend folding machineSpecifications

LIST	VALUE
Film thickness	0.1~ 1.0mm (steel), 0.1~ 2.0mm (aluminum)
Test board width	≤100mm
Overall Dimensions	300300190mm
Shipment Weight	50kg
Standards	GB/T 30791,ISO 17132

Pushen WZJ-II T-Bend folding machine Packing list

Bending machine X1, handle X2

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Can the thinnest one be pressed to 0.1mm?

[A]

Yes, there is no limit to thinness, the most important thing is thickness.

[Q]

What are the steps of the T-Bend test?

[A]

The "T-Bend" test involves preparing the specimen, setting up a bending device, applying a bending force, visually inspecting the specimen, and recording the test results.

[Q]

Do you have WZJ-II Bending Instrument? Can you bend 3mm Aluminum Panel?

[A]

Nothing can be bent so thick, the thickest can only be bent by 2mm.

[Q]

What is the Film thickness test range of this T-bending machine?

[A]

Hello, the steel plate Film thickness test range is 0.1~ 1mm, aluminum plate is 0.1~ 2mm.

[Q]

Is there a GB/T22412 standard T-Bend folding machine?

[A]

This PUSHEN T-Bend folding machine is fine!

+Pushen WZJ-II T-Bend folding machine Big data

+Pushen WZJ-II T-Bend folding machineSimilar products

+Pushen WZJ-II T-Bend folding machineKnowledge

+Pushen WZJ-II T-Bend folding machineStandard

+Navigation