DECO DECO-PM-1 * 5L horizontal Ball mill single tank/5L

Introduction:

 "DECO-PM-5L" tank mill ball mill, also known as roller table machine, can be used for powder production in various industries such as chemical industry, materials, metallurgy, ceramics, glass, etc., as well as sample development of universities and scientific research units. The ball mill is equipped with a ball mill tank for use, according to the ball mill tank capacity, the tank mill can be divided into 5L, 10L, 15L, 30L four specifications, DECO single tank tank mill ball mill is easy to use, flexible application, simple structure and low price, but its grinding time is longer, compared with the planetary ball mill, the grinding effect has a certain gap, suitable for the laboratory large-scale 300-400 mesh powder development.

Operating Principle:

The tank mill ball mill has two shafts, one of which is powered by the motor pulley and can roll at high speed, and the rubber roller interspersed on the shaft is made of polyurethane, which has good friction, heat resistance and wear resistance, and the ball mill tank placed on the rubber roller also rolls at high speed under the rolling of the transmission shaft, which makes the material and the grinding ball in the ball mill tank produce huge energy under the action of gravity, friction and impact force, and this energy can make the material achieve the effects of crushing, mixing and homogenization;

Application examples:

Paint, wet grinding, titanium oxide, quartz sand, zirconia, alumina, graphite, fibers, seeds......

Process characteristics:

  1. The transmission shaft is made of chrome-plated material, which is bright and beautiful, no rust, and is more convenient for the rubber roller to adjust the distance laterally;

  2. The thickened square steel structure is selected, the control cabinet shell is finely made, the thickened material is thickened, and the whole is strong and durable;

  3. The inside and outside are treated with milky white spraying, which is smooth and exquisite and effectively anti-corrosion;

  4. The selection of Delixi brand control system, Dedong brand good motor;

  5. The control cabinet is easy to open, easy to overhaul and maintain;

Performance Advantages:

  1. The distance between the optical shafts and the distance between the rubber rollers can be adjusted, and the ball mill tank of any volume of 0.5L-5L can be used;

  2. Ball mill jars of stainless steel, nylon, polyurethane, PTFE and many other different materials can be selected;

  3. Frequency conversion control can be stepless speed regulation, can change the direction of operation, can set time, LED digital display is intuitive, simple to use;

  4. The discharge particle size is fine, the consistency is good, the repeatability is good and uniform;

  5. Pulley drive, high speed, low noise;

  6. Can be dry grinding, wet grinding, vacuum grinding, inert gas grinding;

Performance indicators:

 · Applications: Crushing, grinding, mixing, homogenizing, polishing, etc

 · Application fields: agriculture, chemical industry, beauty, glass, ceramics, textile, electronics, teaching, scientific research, etc

 · Sample characteristics: heavy, ultra-lightweight, highly viscous, strong, liquid, corrosive, easy to oxidize, etc

 · Crushing principle: friction, impact, shear

 · Grinding structure: horizontal

 · Charging method: intermittent type

 · Dry grinding: Yes

 · Wet Grinding: Yes

 · Vacuum Mill: Yes

 · Crushing time: 2-3h

 · Maximum feed size: 20mm

 · Discharge size: 300-400 mesh

 · Maximum grinding capacity in batch: 5L/10L/15L/30L

 · Workstation level: single layer

 · Number of grinding jar stations: 1pcs

 · Ball mill tank volume: 0.5L / 1L / 1.5L / 2L / 3L / 4L / 5L / 10L / 15L / 30L

 · Number of shafts: 1pcs

 · Maximum spacing between rubber rollers: 260mm

 · Maximum shaft spacing: 250mm

 · Ball mill tank speed: 480r/min

 · Transmission shaft material: chrome-plated steel

 · Transmission shaft diameter: 25mm

 · Rubber roller material: polyurethane

 · Ball mill jar type: horizontal practical type, horizontal vacuum type

 · Ball mill pot material: stainless steel, nylon, polypropylene, ultra-high density polyethylene, PTFE, polyurethane, corundum, zirconia, agate

 · Grinding ball material: stainless steel, corundum, alumina, agate, cemented carbide, etc

 · Grinding ball size: 2-40mm

 · Functional modes: forward operation (time can be set), reverse operation (time can be set), forward and reverse alternate operation, intermittent operation (time can be set), timed grinding (time can be set), pause, stepless speed regulation, emergency stop, reset

 · Grinding time setting: digital display, 00:00:01 to 99:59:59

 · Pause time setting: digital display, 00:00:01 to 99:59:59

 · Intermittent operation time setting: digital display, 00:00:01 to 99:59:59 

 · Drive: inverter, three-phase AC motor

 · Drive Voltage: 110-120V/220-240V

 · Drive power: 0.25kw

 · Frequency: 50-60Hz

 · Power connector: single phase

 · Degree of protection: IP53

 · Accessories: manual, warranty card, certificate

 · Body size (W*D*H): 735*425*320

 · Net weight: 32kg

 · Gross weight: 40kg

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.