DECO 10L DECO-PM-2 * 5L horizontal can mill Ball mill single layer/two cans

Introduction:

 "DECO-PM-2*5L" is a horizontal ball mill that can meet the production of small batches of powder, and can also be used for laboratory powder sample use, the ball mill can place 2 ball mill jars of any volume from 0.5L to 5L, with a maximum grinding capacity of 10L, the product has the characteristics of simple structure, easy to use, high grinding efficiency, uniform discharge, long service life, etc., and can be stepless speed regulation, forward and reverse operation, intermittent operation, timing, widely used in various fields of industrial powder production and scientific research and teaching sample development.

Operating Principle:

   The transmission shaft of the tank mill ball mill rolls at high speed under the power of the motor, and the polyurethane rubber roller on the transmission pump also drives the ball mill tank to roll, and inside the ball mill tank, the material and the grinding ball produce huge energy under the action of gravity, impact and friction, and it is this energy that makes the material form a good and uniform crushing effect, and can also be used for mixing, homogenizing, polishing, etc.

Application examples:

   Paint, wet grinding, titanium oxide, quartz sand, zirconia, alumina, graphite, fibers, seeds, glass, cement, soil, etc

Process characteristics:

  1. The transmission shaft is made of chrome-plated material, which is bright and beautiful, no rust, and is more convenient for the rubber roller to adjust the distance laterally;

  2. The thickened square steel structure is selected, the control cabinet shell is finely made, the thickened material is thickened, and the whole is strong and durable;

  3. The inside and outside are treated with milky white spraying, which is smooth and exquisite and effectively anti-corrosion;

  4. The selection of Delixi brand control system, Dedong brand good motor;

  5. The control cabinet is easy to open, easy to overhaul and maintain;

Performance Advantages:

 о The continuous grinding time can reach more than 150 hours, the operation is stable, and there is no need to take care of it;

 о The distance between the movable shaft and the main drive shaft can be adjusted horizontally, and the distance of the rubber roller can be adjusted longitudinally, which is suitable for ball mill jars of different sizes;

 о Pulley drive, high speed, low noise, safety, energy saving, environmental protection;

 о Frequency conversion control can be stepless speed regulation, can change the direction of operation, can set time, LED digital display is intuitive, simple to use;

 о Ball mill jars of stainless steel, nylon, polyurethane, PTFE and many other different materials can be selected;

 o Can be dry grinding, wet grinding, vacuum grinding, inert gas grinding;

 о Fine discharge particle size, good consistency, good repeatability and uniformity;

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.