Elcometer 2020/1 fineness grindometer
UK Elcometer 2020/1 fineness grindometer type double-channel, number of grooves 2, range 0~50μm, scale units µm, Hegman, Mils, PCU, accuracy +/- 2µm, scraper material stainless steel
Elcometer
Elcometer 2020/1
-
TQCVF2124 double-channel fineness grindometer 0-500µm
$ 1524.00 -
TQC VF2125 wide-channel Grindometer Range 0-250 µm with calibrated certificate
$ 1572.00 -
CHINA QXD-15 double-channel Grindometer Zirconia Ceramic Material 0~15μm
$ 459.00 -
TRUIT TR 1203/050 Wide-channel Fineness meter 0~50μm
$ 187.00 -
TQC VF2112 double-channel Fineness gauge 0-50 µm with calibrated certificate
$ 980.00
Elcometer Fineness of Grind Gauges are used to determine particle size and fineness in a wide range of materials such as paints, pigments, inks, coatings, chocolate or other similar products.
Double-grooved grinding fineness plates, all made of hardened stainless steel, with grooves of a certain slope (depending on the model selected).
The scale units are microns, mils, NS (Hegman) or PCU (North), and the error of the fineness plate is ±2μm (0.08mil). All models have a groove width of 12mm (0.47") and a groove length of 127mm (5.0").
How to use the grinding fineness gauge plate
| The measured material is placed in the deepest position in the trough and scraped in the direction of the uphill slope with the supplied scraper, and the particle size is displayed corresponding to the place where the material stops extending. |
Technical parameters
| Part number | Model | range | Hegman (NS) | North (PCU) | scale | certificate | |||
| metric system | Inch | µm | mils | µm | mils | ||||
| K0002041M001 | - | Elcometer 2041/1 | 0-15 | - | - | - | 1 | - | ο |
| K0002041M002 | K0US2041M002 | Elcometer 2041/2 | 0-25 | 0-1 | - | - | 2.5 | 0.1 | ο |
| K0002041M003 | K0US2041M003 | Elcometer 2041/3 | 0-50 | 0-2 | - | - | 5 | 0.2 | ο |
| K0002041M004 | K0US2041M004 | Elcometer 2041/4 | 0-100 | 0-4 | - | - | 10 | 0.5 | ο |
| K0002020M003 | - | Elcometer 2020/3 | 0-15 | - | 8-7 | 10-9 | 1.5 | - | ο |
| K0002020M004 | K0US2020M004 | Elcometer 2020/4 | 0-25 | 0-1 | 8-6 | 10-8 | 2.5 | 0.1 | ο |
| K0002020M001 | K0US2020M001 | Elcometer 2020/1 | 0-50 | 0-2 | 8-4 | 10-5 | 5 | 0.2 | ο |
| K0002020M002 | K0US2020M002 | Elcometer 2020/2 | 0-100 | 0-4 | 8-0 | 10-0 | 10 | 0.5 | ο |
| size | 180 x 40 x 12mm (7.1 x 1.6 x 0.5”) | ||||||||
| weight | 1.36kg (3lb) | ||||||||
| Packing list | Elcometer 2020 or Elcometer 2041 fineness of grind gauges, scrapers, plastic sleeves and operating manuals | ||||||||
Elcometer Elcometer 2020/1 fineness grindometerSpecifications
| LIST | VALUE |
|---|---|
| Scraper type | double-channel |
| Number of grooves | 2 |
| range | 0~50μm |
| Scale unit | µm、Hegman、Mils、PCU |
| Accuracy | ±2µm |
| scraper material | stainless steel |
| Scraper size | 180*40*12mm |
| Groove size | 12*127mm |
| Drawdown blade material | stainless steel |
| Net Weight | 1.36kg |
Elcometer Elcometer 2020/1 fineness grindometer Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ELCOMETER 123 Surface Roughness Tester Operation Method
- Elcometer 456 A456CFNFBI1 Coating Thickness Gauge Beauty Appreciation
- Comparison of two concrete Coating Thickness Gauges
- Eletroplating Nickel Thickness Gauge Selection Case on Steel
- British elcometer Coating Thickness Gauge classification
- What is the accuracy of Elcometer Coating Thickness Gauge?
- One article takes you to know glossiness, reflectance and fog shadow
- Elcometer 506 Adhesion Tester Features
- Elcometer 456 Coating Thickness Gauge
- Elcometer 355 Coating Thickness Gauge Iron and non-iron based probe selection table
- ActiveJB/T 9385-2017
- ActiveGB/T 5211.17-1988
- AbolishGB/T 13217.3-2008
- AbolishGB/T 13217.3-2008
- AbolishGB/T 13217.3-1991