JFL 1MM11 blade with winger Cross Hatch Cutter Blade

JFL 1mm11 Blade Cross Hatch Cutter Blade

This Cross Hatch Cutter blade can be paired with the Cross Hatch Cutter produced by JFL. 1mm11 blade with edge, made of carbide steel, users can also choose different specifications of Cross Hatch Cutter blades according to different requirements.

Brand

SKU: NB007984

JFL

Model

1MM11 blade with winger

Price

$ 78.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

JFL shopSE

Information

Datasheet RFQ Contract Video

What else did others buy

Germany erichsen 295/I Lacquered Cross Hatch Cutter Set 6 teeth/1mm

$ 980.00
MODERNER QFH 2mm (5-slot) Cross Hatch Cutter for organic coatings cross-cut adhesion determination

Login
TRUIT TR 5001/4 Single Sided Cross Hatch Cutter 2mm/6 Tooth

$ 146.00
TQC SP1703 cross-cut cutter head 6 teeth, spacing 2mm for CC2000/CC3000 series

$ 368.00
TQC VF2357 cross-cut blade 6 teeth 2mm for CC1000 series

$ 834.00

Genuinegoods

JFL 1MM11 blade with winger Cross Hatch Cutter BladeOverview
Specifications
Comments
FAQs

1MM11 blade with winger

Cross Hatch Cutter Blade

The paint scratcher blade can be matched with the paint scratcher produced by Jinfulan. Users can select different specifications of paint film crosser blades according to different requirements.

Specifications 1mm11 edge edge

Material: hard alloy steel material

JFL 1MM11 blade with winger Cross Hatch Cutter BladeSpecifications

LIST	VALUE
Number of teeth	11 teeth
Tooth spacing	1mm
Instrument material	Carbide steel material

JFL 1MM11 blade with winger Cross Hatch Cutter Blade Packing list

Blade x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Determination of water-based interior-wall Coating adhesion, is this cross-cutting knife suitable?

[A]

This model is suitable for the determination of water-based inner and outer wall Coating adhesion in architectural coatings. The cross-cut test is mainly carried out with knives, and the firmness of the Coating to the substrate is judged according to the number of squares of the film peeling. Use a sharp blade and a scale steel ruler to cut 11 cuts with a distance of 1mm in the vertical and horizontal directions of the test plate, and the vertical and horizontal cuts intersect into 100 squares. So it is applicable.

[Q]

Do you have the Cross Hatch Cutter blades required by ISO 2409?

[A]

This 1mm11 blade with winger Cross Hatch Cutter blade will do.

+JFL 1MM11 blade with winger Cross Hatch Cutter Blade Big data

+JFL 1MM11 blade with winger Cross Hatch Cutter BladeSimilar products