SDC STM-IVB Stormer Viscometer KU/CP/G

SDC STM-IVB Stormer Viscometer can display Krebs unit KU, gram G unit, centipoise CP three Viscosity units, the measurement viscosity range of 40~141 KU, STM-IVB Stormer Viscometer is a digital Viscometer, in line with ASTM D562 standard.

Brand

SKU: NB008243

SDC

Model

STM-IVB

Get Quote

SDC

Information

Datasheet Video Manual

What else did others buy

TQC Sheen DV2300 Krebs Viscometer Stormer Viscometer Coating KU Viscometer

$ 6875.00
PUSHEN STM-IVB Stormer Viscometer KU/G/CP

$ 596.00
PUSHEN STM-IV Stormer Viscometer KU/G

$ 568.00
TRUIT TR 1123/1 Coating Stormer Viscometer KU/cP/g Unit

$ 677.00
STM-IV Digital Stormer Viscometer YONGLIDA 40.2KU~ 141.0KU Viscosity Range

$ 755.00

Genuinegoods

SDC STM-IVB Stormer ViscometerOverview
Specifications
Comments
FAQs

STM-IVB

Stormer Viscometer

Introduction

Comparison of the Sedchan STM-IVB Stormer viscometerThe STM-IV model adds centipoise (cP) units, which can support the display of Krebs units, gram units, and centipoise units, and measure viscosity in the range40～141 KU、32～1099 grams, 27~5274cP.The STM-IVB Stormer Viscometer uses a 200RPM constant speed motor to rotate a paddle rotorReaction torque at 200RPM is converted to Krebs singleThe viscosity value of the bit.The STM-IVB display is a digital display display, which is intuitive and clear.Equipped with a 500ml glass container.

Instrument composition

The STM-IVB Viscometer includes the following accessories

(1) STM-IVB Viscometer Vertical Rods and Base （2）One 500ml glass container

(3) Paddle rotor （4）Power cord 250 VAC one

(5) 500ml glass container holder small (6) data cable HL-340

(7) The 500ml glass container holder is large （8）Operating Manual (SDC/04-659)

Front view and side view of the Sedchang STM-IVB Stormer viscometer

Rear view of the Sedchan STM-IVB Stormer viscometer

Product display diagram

Image of the Sedchang STM-IVB Stormer viscometer

Side view of the Sedchan STM-IVB Stormer viscometer

SDC STM-IVB Stormer ViscometerSpecifications

LIST	VALUE
Display mode	digital display
Measurement range	40~141KU，32~1099g，27~5274cP
Unit display	KU/g/cP
Swirl/spin speed	200rpm
Repeatability	±1%F.S
Precision	±1.5%F.S
Power supply Voltage	220V AC 50Hz 16W
Environmental temperature	0~40℃
Dimensions	150110750mm
Instrument Weight	10kg
printer output	Print through the host computer software
Working Relative Humidity	20~80% non-condensing
Speed Accuracy	±0.1rpm
Lifting method	Lever lift

SDC STM-IVB Stormer Viscometer Packing list

Viscometer x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Is this Stormer Viscometer dedicated to testing Coating Printing ink viscosity?

[A]

Hello, yes.

[Q]

Can this Stormer Viscometer be applied to GB/T9269?

[A]

[Q]

What happens when STM-IV viscosity measurement exceeds the viscosity range?

[A]

The instrument can not measure more than the maximum range of the sample, otherwise it will affect the accuracy of the instrument.

[Q]

How is the rotor of the STM-IVB Stormer Viscometer installed?

[A]

Hello, to install the rotor, first loosen the Viscometer spindle airfoil screw and insert the paddle rotor into the inside end of the Viscometer spindle. Make sure the grooves on the rotor line up with the hole where the thumb screw enters. Tighten the thumb screw.

[Q]

How can I transfer the data of STM-IVB Viscometer to my computer?

[A]

Hello, connect the data cable, just lift the handle and send the data to the computer.

+SDC STM-IVB Stormer Viscometer Big data

+SDC STM-IVB Stormer ViscometerSimilar products