MODERNER SZQ-75 (ISO Bird-type) film Applicator 75 μm Film Applicator

Introduction of SZQ-75 Wet Film Applicator

MODERNER SZQ-75 (ISO bird type) Wet Film Applicator can prepare 100μm wet film width, and the coating film thickness is 75 microns, which meets the ISO standard. The thickness of the wet film is determined by the groove depth of the coating Wet Film Applicator. 9Cr18Mo high carbon chromium stainless steel material, showing the advantages of corrosion resistance, high hardness, durable. ISO paint Wet Film Applicator is mainly used to coat wet film with specified thickness to measure the hiding power, color and other properties of paint samples. It is widely used in the paint and ink industry, and the film is uniform and of high quality.

Hardness value

The hardness value of SZQ-75 (ISO bird type) Wet Film Applicator is HRC48±2.

use material

SZQ-75 (ISO bird type) Wet Film Applicator is made of 9Cr18Mo high carbon chromium stainless steel, 9Cr18 is high carbon chromium martensitic stainless bearing steel. It has the advantages of high hardness and wear resistance.

Pictures

Steps

(1) Place the sample on the platform and fix the sample to ensure that the Wet Film Applicator does not move when it slides over.

(2) According to the required wet film thickness requirements, select a Wet Film Applicator of the corresponding specification, and place it on the short side of the sample, close to parallel or at a specified position.

(3) Pour about 5 ml of the sample in front of the Wet Film Applicator, press both ends of it with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required thickness.

(4) MODERNER SZQ-75 Wet Film Applicator is cleaned and dried with suitable solvent after use, and the surface is coated with oil or vaseline.

Applicator x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.