MODERNER Frame 30/60/90/120 Large Frame Applicator 90mm Frame Coated Film Applicator

Introduction

MODERNER frame type 30/60/90/120 large frame type Applicator has a groove width of 90mm, using 9Cr18Mo stainless steel material, which is wear-resistant and corrosion-resistant, and can be used for high-wear experiments to coat a wet film with a specific thickness. The coating film is uniform and can be coated on all sides cloth. The coating film thickness of frame type 30/60/90/120 large frame type Applicator is 30μm, 60μm, 80μm, 90μm.

Advantages

Frame type 30/60/90/120 large frame type preparer is suitable for coating wet film with specific thickness, suitable for coating, ink, color paint and other industries.

Pictures

Parameter comparison

Steps for usage

1. Put the template on the platform and fix it so that the Frame Applicator does not move when it slides over.

2. Select the preparation of the appropriate wet film thickness, and place it on the short side of the sample, close to parallel or at a specified position.

3. Pour about 5 ml of sample on the front of the frame 30/60/90/120 large Frame Applicator.

4. Press both ends of the Applicator with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required wet film thickness.

4. After use, the frame type 30/60/90/120 large frame Applicator should be cleaned with a suitable solvent, and the surface should be coated with oil or Vaseline.

Applicator x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.