XIONGFA MDJ-300S Solid Density Meter weight range 0.005~ 300g
The solid Density Meter adopts German HBM imported Sensors, better measurement repeability, two steps to directly read the Density of any solid, particle, floating material, easy to operate. PC material sink, wear-resistant and drop-resistant, anti-corrosion, 0.5cm stainless steel hanging wire, no bending and deformation, vertical with the hanging bar does not touch the sink, can determine the main material content%.
XIONGFA
MDJ-300S
-
FRARIV C100T Basic Tapped Density Meter, Compliant with Pharmacopoeia
$ 926.00 -
XIONGFA MDJ-600A Solid Density Meter measurement range 0.01g~ 600g
$ 318.00 -
Density Tester JHY-300W Solid Density Meter Imported Sensors 300g 0.001g/cm3
$ 375.00 -
XIONGFA KSM-301 U-Shaped Vibrating Tube Method Density Meter Paltier Temperature Control
$ 3267.00 -
Density Balance JHY-300 Solid Density Meter Imported Sensors 300g 0.001g/cm3
$ 263.00
Introduction
Xiongfa Solid Density Meter MDJ-300S can quickly and conveniently measure the density of solids of various shapes, equipped with professional measuring accessories, and integrally formed transparent Water Tank. Easy to carry, easy to operate and powerful! Using Archimedes principle buoyancy method, accurate direct reading measurement value.
Features
1. Directly read the density value and volume value of any shape whose density is greater than one or less than a lump, particle, or floating body.
2. Simple operation, high precision and good repeatability.
3. Temperature compensation and solution compensation can be set, more humanized operation, more in line with the needs of on-site operations.
4. With RS-232C computer interface, it can be easily printed.
5. It adopts the one-piece large Water Tank design (length, width and height 150*100*70mm), which can measure the density of relatively large block objects.
6. The density accessories are integrally injection molded, durable, not easy to break, and more convenient to operate
7. Equipped with a Wind Shield, it is more suitable for on-site testing.
Application
MDJ-300S solid density meter is widely used in rubber, rubber seals, silicone rubber, plastics, particles, floating bodies, ceramics, PVC pipes, plates, plastic products, powder metallurgy, magnetic materials, rocks, sponges, PE particles, wires and cables, etc. Densities of various solids.
Standards
MDJ-300S solid density meter GB/T533, ISO2781, ASTMD297-93, DIN 53479, ASTMD792, D618, D891, ISO1183, GB/T1033, ASTM D792-00, JISK6530, ASTM D792-00, JISK6530 standard.
Pictures
XIONGFA MDJ-300S Solid Density MeterSpecifications
| LIST | VALUE |
|---|---|
| Weighing range | 0.005~300g |
| Density Accuracy | 0.001g/cm³ |
| Data Interface | RS232C |
| Standards | GB/T533、ISO2781、ASTMD297-93、DIN 53479、ASTMD792、D618,D891、ISO1183、GB/T1033、ASTM D792-00、JISK6530,ASTM D792-00、JISK6530标准 |
XIONGFA MDJ-300S Solid Density Meter Packing list
Host x1, sink x1, measurement table x1, forceps x1, power transformer x1, 100g weight x1, windproof dust cover x1, a set of particle measurement accessories, a set of float measurement accessories x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.